Nanohybrids Based on Solid and Foam Polyurethanes

Polymer nanocomposites are a going part of Materials Science and Engineering. These new composite materials exhibit dimensional and thermal stability of inorganic materials and toughness and dielectric properties of polymers. Development of nanocomposites become an important approach to create high-performance composite materials. In this study silica, fly ash, silica nanotubes and carbon black particles have been added to modify polyurethane foam and thermoplastic polyurethanes. It has been found that the addition of silica can diminish the size of foam bubbles, resulting in an increased stiffness of the material, increase of the compressive strength, and greater resistance to deformation. However, the uniformity of bubbles is reduced, resulting in increased friction of the material. Fly ash added to the foam can make bubbles smaller and improve uniformity of cells. Therefore, the material stiffness and compressive strength, resistance to deformation, and has little impact on the dynamic friction of the material. Adding nanotubes make bubble size unequal, and the arrangement of the bubble uneven, resulting in decreased strength of the material, while the friction increases. After the addition of carbon black to the polyurethane foam, due to the special surface structure of the carbon black, the foam generates more bubbles during the foaming process changing the foam structure. Therefore, the material becomes soft, we obtain a flexible polyurethane foam. The results of mechanical properties determination of the thermoplastic polyurethane that adding particles may increase the stiffness and wear resistance of the thermoplastic polyurethane, while the tensile properties of the material are reduced. This phenomenon may be due to agglomeration of particles during the mixing process. Possibly the particles cannot be uniformly dispersed in the thermoplastic polyurethane