This thesis is written in an alternate format. The thesis is composed of a general introduction, two original manuscripts, and a general conclusion. References cited within each chapter are given at the end of each chapter. The general introduction starts with the driving force behind this research, and gives an overview of previous work on boron doped molybdenum silicides, Nb/Nb{sub 5}Si{sub 3} composites, boron modified niobium silicides and molybdenum niobium silicides. Chapter 2 focuses on the oxidation behavior of Nb-Mo-Si-B alloys. Chapter 3 contains studies on a novel chlorination technique to improve the oxidation resistance of Nb-Mo-Si-B alloys. Chapter 4 summarizes the important results in this study
Molybdenum base alloys with the addition of small amounts of silicon (2 - 4.5 wt%) and boron (~1 wt%...
There has been significant research into improving the efficiency of aerospace engines. This can be ...
There has been significant research into improving the efficiency of aerospace engines. This can be ...
Microstructure and oxidation of M-Si-B alloys, where M=Nb, Mo and (Nb,Mo) with phase assemblies T1(M...
Extensive work has been undertaken to develop niobium based structural alloys for high temperature a...
Nb-based alloys are of particular interest to replace the current Ni-based superalloys for high-temp...
The oxidation response of various niobium based refractory alloys from the Nb-Mo-Si-B-X alloy system...
The oxidation response of various niobium based refractory alloys from the Nb-Mo-Si-B-X alloy system...
Nb-based alloys are of particular interest to replace the current Ni-based superalloys for high-temp...
Mo-Si-B coating was prepared on Nb-Si alloys to improve the high-temperature oxidation. The influenc...
It has been the trend to use nickel based superalloys in high temperature applications, however high...
Niobium based alloys are being tapped as potential successors to current nickel base superalloys in ...
It has been the trend to use nickel based superalloys in high temperature applications, however high...
Niobium based alloys are being tapped as potential successors to current nickel base superalloys in ...
International audienceThe aims of this study were to develop Nb4Fe4Si7 coating for Nb-silicide compo...
Molybdenum base alloys with the addition of small amounts of silicon (2 - 4.5 wt%) and boron (~1 wt%...
There has been significant research into improving the efficiency of aerospace engines. This can be ...
There has been significant research into improving the efficiency of aerospace engines. This can be ...
Microstructure and oxidation of M-Si-B alloys, where M=Nb, Mo and (Nb,Mo) with phase assemblies T1(M...
Extensive work has been undertaken to develop niobium based structural alloys for high temperature a...
Nb-based alloys are of particular interest to replace the current Ni-based superalloys for high-temp...
The oxidation response of various niobium based refractory alloys from the Nb-Mo-Si-B-X alloy system...
The oxidation response of various niobium based refractory alloys from the Nb-Mo-Si-B-X alloy system...
Nb-based alloys are of particular interest to replace the current Ni-based superalloys for high-temp...
Mo-Si-B coating was prepared on Nb-Si alloys to improve the high-temperature oxidation. The influenc...
It has been the trend to use nickel based superalloys in high temperature applications, however high...
Niobium based alloys are being tapped as potential successors to current nickel base superalloys in ...
It has been the trend to use nickel based superalloys in high temperature applications, however high...
Niobium based alloys are being tapped as potential successors to current nickel base superalloys in ...
International audienceThe aims of this study were to develop Nb4Fe4Si7 coating for Nb-silicide compo...
Molybdenum base alloys with the addition of small amounts of silicon (2 - 4.5 wt%) and boron (~1 wt%...
There has been significant research into improving the efficiency of aerospace engines. This can be ...
There has been significant research into improving the efficiency of aerospace engines. This can be ...