The following describes the SRTC contributions to EMSP 81898 with emphasis on the specific applications to the SRS high level radioactive waste tanks. In particular, the crack growth criteria, constraint effects, and the weld residual stress effects are covered. The write-up consists of two parts: (1) Crack Growth Simulation, and (2) Stress Corrosion Cracking in Weld Residual Stress
The evaporator recycle streams of nuclear waste tanks may contain waste in a chemistry and temperatu...
A detailed investigation of detrimental processes such as corrosion and stress corrosion cracking (S...
Cracking of fuel claddings is a serious concern when selecting candidate alloys for the development ...
The research activities of this EMSP project at the U. S. Department of Energy Savannah River Site (...
A stress corrosion cracking (SCC) model has been adapted for performance prediction of high level ra...
Radioactive wastes are confined in 49 underground storage tanks at the Savannah River Site. The tank...
For higher operational temperatures and pressures required in petrochemical plants, the modified 13C...
Stress corrosion cracking is one of the most common corrosion-related causes for premature breach of...
Detailed residual stress analysis was performed for a multi-pass butt weld, representing the middle ...
Studies were made on the causes of observed leaks in mild steel tanks used to store liquid waste fro...
Cleavage fracture is a catastrophic phenomenon as it is a sudden structural collapse occurring to st...
One of the potential failure modes of the drip shield (DS), the waste package (WP) outer barrier, an...
The stress corrosion crack is one of the fracture phenomena for the major structure components in nu...
The Heavy-Section Steel Technology (HSST) Program is conducted for the US Nuclear Regulatory Commiss...
The Heavy-Section Steel Technology (HSST) Program is conducted for the Nuclear Regulatory Commission...
The evaporator recycle streams of nuclear waste tanks may contain waste in a chemistry and temperatu...
A detailed investigation of detrimental processes such as corrosion and stress corrosion cracking (S...
Cracking of fuel claddings is a serious concern when selecting candidate alloys for the development ...
The research activities of this EMSP project at the U. S. Department of Energy Savannah River Site (...
A stress corrosion cracking (SCC) model has been adapted for performance prediction of high level ra...
Radioactive wastes are confined in 49 underground storage tanks at the Savannah River Site. The tank...
For higher operational temperatures and pressures required in petrochemical plants, the modified 13C...
Stress corrosion cracking is one of the most common corrosion-related causes for premature breach of...
Detailed residual stress analysis was performed for a multi-pass butt weld, representing the middle ...
Studies were made on the causes of observed leaks in mild steel tanks used to store liquid waste fro...
Cleavage fracture is a catastrophic phenomenon as it is a sudden structural collapse occurring to st...
One of the potential failure modes of the drip shield (DS), the waste package (WP) outer barrier, an...
The stress corrosion crack is one of the fracture phenomena for the major structure components in nu...
The Heavy-Section Steel Technology (HSST) Program is conducted for the US Nuclear Regulatory Commiss...
The Heavy-Section Steel Technology (HSST) Program is conducted for the Nuclear Regulatory Commission...
The evaporator recycle streams of nuclear waste tanks may contain waste in a chemistry and temperatu...
A detailed investigation of detrimental processes such as corrosion and stress corrosion cracking (S...
Cracking of fuel claddings is a serious concern when selecting candidate alloys for the development ...