Nondestructive and Localized Measurements of Stress-Strain Curves and Fracture Toughness of Ferritic Steels at Various Temperatures Using Innovative Stress-Strain Microprobe Technology. Final Report for Period 8/13/1996--06/16/1999

Strain evaluation using a non-contact deformation measurement system in tensile tests of irradiated F82H and 9cr ODS steels

Hideo Sakasegawa
Xiang Chen
Taichiro Kato
Hiroyasu Tanigawa
Masami Ando
Josina W. Geringer
Shigeharu Ukai
Satoshi Ohtsuka

August 2018

We developed a non-contact deformation measurement system to accurately evaluate strain for post irr...

Mechanical properties evaluation by means of instrumented indentation test

Brumek, J.

January 2006

An instrumented indentation study focusing on the materials with non-linear stress-strain behavior i...

Experimental and numerical study of ball indentation for evaluation of mechanical properties and fracture toughness of structural steel

Ghosh, Sabita
Tarafder, Mita
Sivaprasad, S
Tarafder, S

January 2010

Determination of mechanical properties of materials using non-conventional techniques has been an ac...

In-Situ Measurements of Mechanical Properties Using Novel Automated Ball Indentation System

Fahmy M. Haggag
Thermal Annealing
Plant Life Extension
Astm Stp

January 1993

ABSTRACT: Determination of the integrity of any metallic structure is required either to ensure that...

Materials property testing using a stress-strain microprobe

Panayotou, N.F.
Baldrey, D.G.
Haggag, F.M.

September 1998

The Stress-Strain Microprobe (SSM) uses an automated ball indentation technique to obtain flow data ...

Stress−strain curves and derived mechanical parameters of P91 steel from spherical nanoindentation at a range of temperatures

RUIZ MORENO ANA MARIA
HAEHNER PETER
FUMAGALLI FRANCESCO
HAIBLIKOVA V
CONTE MARCELLO
RANDALL NICHOLAS

February 2020

This work compares different measurement and analysis protocols of spherical nanoindentation tests p...

NEW APPROACH TO STRESS-STRAIN CURVE PREDICTION USING BALL INDENTATION TEST

Brumek, J.

January 2012

This work is concerned with the method for predicting stress-strain behavior of material using instr...

Use of micro tensile test samples in determining the remnant life of pressure vessel steels

Molak, R. M.
Kartal, M.
Pakiela, Z.
Manaj, W.
Turski, M.
Hiller, S.
Gungor, S.
Edwards, L.
Kurzydłowski, K. J.

January 2007

The aim of this collaborative study was to measure mechanical properties of 14MoV67-3 steel taken fr...

Local identification of the stress-strain curves of metals at a high strain rate using repeated micro-impact testing

Kermouche, Guillaume
Grange, F.
Langlade, C.

May 2013

International audienceUnderstanding the effect of various mechanical processes such as shot peening ...

Determination of local stress-strain properties of spot welded joints using the instrumented indentation test

Brauser, S.
Subaric-Leitis, A.
Ullner, C.
Rethmeier, M.

January 2012

Determination of Local Stress-Strain Properties of Spot Welded Joints Using the Instrumented Indenta...

Development of a pattern making method for strain measurement on microstructural level in ferritic cast iron

Kasvayee, Keivan Amiri
Elmquist, Lennart
Jarfors, Anders E.W.
Ghassemali, Ehsan

January 2014

The current paper focuses on development of a method for studying micro-scale strains on the microst...

Nondestructive analysis of structure and stresses by ultrasonic and micromagnetic methods

Höller, P.

January 1987

During operation of machinery or use of components, strength and toughness of materials are slowly d...

Fracture Toughness Master Curve of bcc Steels

Planman, Tapio
Server, W.L.

January 2012

The Master Curve methodology has been developed as an advanced, direct technique for characterizing ...

Instrumented indentation test used for mechanical properties determination

Brumek, J.

January 2007

Focusing on the materials with non-linear stress-strain behavior an instrumented indentation study i...

DETERMINATION OF THE TRUE STRESS-STRAIN PROPERTIES OF BRITTLE MATERIALS TO 5000 F. Ninth Monthly Report

Digesu, F.J.
Pears, C.D.

May 1962

The development of the system and techniques to permit determination of strains at right angle to th...

Strain evaluation using a non-contact deformation measurement system in tensile tests of irradiated F82H and 9cr ODS steels

Hideo Sakasegawa
Xiang Chen
Taichiro Kato
Hiroyasu Tanigawa
Masami Ando
Josina W. Geringer
Shigeharu Ukai
Satoshi Ohtsuka

August 2018

We developed a non-contact deformation measurement system to accurately evaluate strain for post irr...

Mechanical properties evaluation by means of instrumented indentation test

Brumek, J.

January 2006

An instrumented indentation study focusing on the materials with non-linear stress-strain behavior i...

Experimental and numerical study of ball indentation for evaluation of mechanical properties and fracture toughness of structural steel

Ghosh, Sabita
Tarafder, Mita
Sivaprasad, S
Tarafder, S

January 2010

Determination of mechanical properties of materials using non-conventional techniques has been an ac...

In-Situ Measurements of Mechanical Properties Using Novel Automated Ball Indentation System

Fahmy M. Haggag
Thermal Annealing
Plant Life Extension
Astm Stp

January 1993

ABSTRACT: Determination of the integrity of any metallic structure is required either to ensure that...

Materials property testing using a stress-strain microprobe

Panayotou, N.F.
Baldrey, D.G.
Haggag, F.M.

September 1998

The Stress-Strain Microprobe (SSM) uses an automated ball indentation technique to obtain flow data ...

Stress−strain curves and derived mechanical parameters of P91 steel from spherical nanoindentation at a range of temperatures

RUIZ MORENO ANA MARIA
HAEHNER PETER
FUMAGALLI FRANCESCO
HAIBLIKOVA V
CONTE MARCELLO
RANDALL NICHOLAS

February 2020

This work compares different measurement and analysis protocols of spherical nanoindentation tests p...

NEW APPROACH TO STRESS-STRAIN CURVE PREDICTION USING BALL INDENTATION TEST

Brumek, J.

January 2012

This work is concerned with the method for predicting stress-strain behavior of material using instr...

Use of micro tensile test samples in determining the remnant life of pressure vessel steels

Molak, R. M.
Kartal, M.
Pakiela, Z.
Manaj, W.
Turski, M.
Hiller, S.
Gungor, S.
Edwards, L.
Kurzydłowski, K. J.

January 2007

The aim of this collaborative study was to measure mechanical properties of 14MoV67-3 steel taken fr...

Local identification of the stress-strain curves of metals at a high strain rate using repeated micro-impact testing

Kermouche, Guillaume
Grange, F.
Langlade, C.

May 2013

International audienceUnderstanding the effect of various mechanical processes such as shot peening ...

Determination of local stress-strain properties of spot welded joints using the instrumented indentation test

Brauser, S.
Subaric-Leitis, A.
Ullner, C.
Rethmeier, M.

January 2012

Determination of Local Stress-Strain Properties of Spot Welded Joints Using the Instrumented Indenta...

Development of a pattern making method for strain measurement on microstructural level in ferritic cast iron

Kasvayee, Keivan Amiri
Elmquist, Lennart
Jarfors, Anders E.W.
Ghassemali, Ehsan

January 2014

The current paper focuses on development of a method for studying micro-scale strains on the microst...

Nondestructive analysis of structure and stresses by ultrasonic and micromagnetic methods

Höller, P.

January 1987

During operation of machinery or use of components, strength and toughness of materials are slowly d...

Fracture Toughness Master Curve of bcc Steels

Planman, Tapio
Server, W.L.

January 2012

The Master Curve methodology has been developed as an advanced, direct technique for characterizing ...

Instrumented indentation test used for mechanical properties determination

Brumek, J.

January 2007

Focusing on the materials with non-linear stress-strain behavior an instrumented indentation study i...

DETERMINATION OF THE TRUE STRESS-STRAIN PROPERTIES OF BRITTLE MATERIALS TO 5000 F. Ninth Monthly Report

Digesu, F.J.
Pears, C.D.

May 1962

The development of the system and techniques to permit determination of strains at right angle to th...

Strain evaluation using a non-contact deformation measurement system in tensile tests of irradiated F82H and 9cr ODS steels

Hideo Sakasegawa
Xiang Chen
Taichiro Kato
Hiroyasu Tanigawa
Masami Ando
Josina W. Geringer
Shigeharu Ukai
Satoshi Ohtsuka

August 2018

We developed a non-contact deformation measurement system to accurately evaluate strain for post irr...

Mechanical properties evaluation by means of instrumented indentation test

Brumek, J.

January 2006

An instrumented indentation study focusing on the materials with non-linear stress-strain behavior i...

Experimental and numerical study of ball indentation for evaluation of mechanical properties and fracture toughness of structural steel

Ghosh, Sabita
Tarafder, Mita
Sivaprasad, S
Tarafder, S

January 2010

Determination of mechanical properties of materials using non-conventional techniques has been an ac...

Nondestructive and Localized Measurements of Stress-Strain Curves and Fracture Toughness of Ferritic Steels at Various Temperatures Using Innovative Stress-Strain Microprobe Technology. Final Report for Period 8/13/1996--06/16/1999

Abstract

Extracted data

Nondestructive and Localized Measurements of Stress-Strain Curves and Fracture Toughness of Ferritic Steels at Various Temperatures Using Innovative Stress-Strain Microprobe Technology. Final Report for Period 8/13/1996--06/16/1999

Abstract

Extracted data

Related items

Related items