Recent Simulation Conclusions for Damped-Oscillation Control

When suspended payloads are moved with an overhead crane, pendulum like oscillations are naturally introduced. This presents a problem any time a crane is used, especially when expensive and/or delicate objects are moved, when moving in a cluttered and/or hazardous environment, and when objects are to be placed in tight locations. For example, one nuclear waste-handling operation examined by the U.S. Department of Energy (DOE) Oak Ridge National Laboratory (ORNL) is the transportation of heavy objects such as waste storage casks or barrels from one location to another through cluttered process facility environments or storage facilities. Typically, an object is lifted by a crane hook on the end of a cable, creating a pendulum that is free to swing during transit. This swinging motion makes remote positioning of casks or barrels difficult to control precisely and is potentially destructive to facility equipment and to other storage containers. Typically, a crane operator moves objects slowly to minimize induced swinging and allow time for oscillations to dampen, maintaining safety but greatly decreasing the efficiency of operations. Using damped-oscillation control algorithms is one approach to solving this problem. This paper summarizes recent simulation results in damped-oscillation-type control algorithms. It also discusses practical implementation issues including control algorithm robustness to payload length changes, hardware requirements for implementation of the control algorithms, and system limits on Coulomb friction