Wet Oxidation of High-Al-Content III-V Semiconductors: Important Materials Considerations for Device Applications

Wet oxidation of high-Al-content AIGaAs semiconductor layers in vertical cavity surface emitting lasers (VCSELS) has produced devices with record low threshold currents and voltages and with wall-plug efficiencies greater than 50%. Wet oxidation of buried AlGaAs layers has been employed to reduce the problems associated with substrate current leakage in GaAs-on- insulator (GOI) MESFETS. Wet oxidation of high-Al-content AlGaAs semiconductor layers in vertical cavity surface emitting lasers (VCSELS) has produced devices with record low threshold currents and voltages and with wall-plug efficiencies greater than 50%. Wet oxidation of buried AlGaAs layers has been employed to reduce the problems associated with substrate current leakage in GaAs-on- insulator (GOI) MESFETS. Wet oxidation has also been considered as a route to the long-sought goal of a IH-V MIS technology. To continue improving device designs for even higher performance and to establish a truly manufacturable technology based on wet oxidation, the effect of oxidation of a given layer on the properties of the entire device structure must be understood. The oxidation of a given layer can strongly affect the electrical and chemical properties of adjacent layers. Many of these effects are derived from the production of large amounts of elemental As during the oxidation reaction, the resultant generation of point defects, and the diffusion of these defects into adjacent regions. This can modify the chemical and electrical properties of these regions in ways that can impact device design, fabrication, and performance. Current understanding of the problem is discussed here