Results of vertical seismic profiling at Well 46-28, Rye Patch Geothermal Field, Pershing County, Nevada

A Vertical Seismic Profile (VSP) was recorded in Rye Patch by LBNL between December 11 and December 13, 1997. Figure 1 shows the location of the Rye Patch Geothermal Field with Well 46-28 located within the marked Rye Patch Anomaly. The VSP in Well 46-28 used a vibroseis source and a single-level, high temperature, hydraulic wall-locking, 3-component seismometer. The vibroseis source was a Mertz P-wave vibrator. The source sweep was 10 Hz to 80 Hz, 10 seconds long, with a 0.2 s cosine taper. The borehole geophone was an SSC model LVHK 6001 using 14 Hz geophones. The recording system was a Geometrics Strataview. Six data channels were recorded: the three geophones, the source pilot, the vibrator reference and the vibrator baseplate accelerometer. The record length was 12,288 samples at a 1 ms sample rate, giving a 2.3 s correlated record length. A 10 Hz low cut filter was used and no high cut filter was used except the anti-alias filter. Results are described