Argonne National Laboratory is developing advanced cathodes for pressurized operation of the molten carbonate fuel cell (MCFC) at approximately 650 degrees Centigrade. These cathodes are based on lithium ferrate (LiFeO[sub 2]) which is attractive because of its very low solubility in the molten (Li,K)[sub 2]CO[sub 3] electrolyte. Because of its high resistivity, LiFeO[sub 2] cannot be used as a direct substitute for NiO. Cation substitution is, therefore, necessary to decrease resistivity. The effect of cation substitution on the resistivity and deformation of LiFeO[sub 2] was determined. The substitutes were chosen because their respective oxides as well as LiFeO[sub 2] crystallize with the rock-salt structure
Fuel cells are promising candidates for converting chemical energy into electrical energy. The Molte...
Fuel cells are promising candidates for converting chemical energy into electrical energy. The Molte...
In the present paper, we demonstrate how modifications of the microstructure and the chemical compos...
Argonne National Laboratory (ANL) is developing advanced cathodes for pressurized operation of the m...
The cathode materials for molten carbonate fuel cells (MCFCs) must have low dissolution rate, high s...
The molten carbonate fuel cell (MCFC) operates at temperatures around 650 °C and uses an electrolyte...
Over the past 12 months, developments in both porous and non-porous materials for the molten carbona...
For practical use of molten carbonate fuel cells (MCFCs), Ni shorting due to NiO cathode dissolution...
The dissolution of NiO cathodes during cell operation is a limiting factor to the successful commerc...
The dissolution of NiO cathodes during cell operation is a limiting factor to the successful commerc...
Molten carbonate fuel cells (MCFC) are considered as the second generation fuel cell technology. The...
The polarization characteristics of porous LiCoO=, LiFeO=, and NiO structures when used as molten ca...
The search for a NiO-based cathode for molten carbonate fuel cell has been directed towards solid so...
This project focused on addressing the two main problems associated with state of art Molten Carbona...
Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (...
Fuel cells are promising candidates for converting chemical energy into electrical energy. The Molte...
Fuel cells are promising candidates for converting chemical energy into electrical energy. The Molte...
In the present paper, we demonstrate how modifications of the microstructure and the chemical compos...
Argonne National Laboratory (ANL) is developing advanced cathodes for pressurized operation of the m...
The cathode materials for molten carbonate fuel cells (MCFCs) must have low dissolution rate, high s...
The molten carbonate fuel cell (MCFC) operates at temperatures around 650 °C and uses an electrolyte...
Over the past 12 months, developments in both porous and non-porous materials for the molten carbona...
For practical use of molten carbonate fuel cells (MCFCs), Ni shorting due to NiO cathode dissolution...
The dissolution of NiO cathodes during cell operation is a limiting factor to the successful commerc...
The dissolution of NiO cathodes during cell operation is a limiting factor to the successful commerc...
Molten carbonate fuel cells (MCFC) are considered as the second generation fuel cell technology. The...
The polarization characteristics of porous LiCoO=, LiFeO=, and NiO structures when used as molten ca...
The search for a NiO-based cathode for molten carbonate fuel cell has been directed towards solid so...
This project focused on addressing the two main problems associated with state of art Molten Carbona...
Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (...
Fuel cells are promising candidates for converting chemical energy into electrical energy. The Molte...
Fuel cells are promising candidates for converting chemical energy into electrical energy. The Molte...
In the present paper, we demonstrate how modifications of the microstructure and the chemical compos...