Development and testing of industrial scale, coal-fired combustion system, Phase 3. Nineteenth quarterly technical progress report, July 1, 1996--September 30, 1996

In the third quarter of calendar year 1996, 13 days of combust-boiler tests were performed, including 3 days of tests on a parallel DOE sponsored project on sulfur retention in a stagging combustor. Between tests, modifications and improvements that were indicated by these tests were implemented. This brings the total number of test days to the end of September in the task 5 effort to 41, increased to 46 as of the date of this Report, 10/27/96. This compares with a total of 63 test days needed to complete the task 5 test effort. As reported previously, the only major modification to the Williamsport combustor has been the addition of a new downstream section, which lengthens the combustor and improves the combustor-boiler interface. The original combustor section, which includes the fuel, air, and cooling water delivery systems remained basically unchanged. Only the refractory liner was completely replaced, a task which occurs on an annual basis in all commercial stagging utility combustors. Therefore, this combustor has been operated since 1988 without replacement