This document contains historical calculations originally published in the 242-A Evaporator Dangerous Waste Permit Application, DOE/RL-90-42, Rev 0. They are being released as a supporting document, along with brief explanatory information, to be used as a reference in Rev 1 of the permit application and in other supporting documents, such as the 242-A Evaporator Data Quality Objectives
This document, the Standards/Requirements Identification Document (S/RID) Phase 2 Assessment Report ...
This document, the Standards/Requirements Identification Document (S/RID) Phase I Assessment Report ...
SIGLEAvailable from British Library Document Supply Centre- DSC:7628.85(WSL-LR--508(AP)M) / BLDSC - ...
This document describes the analysis of the waste evaporation process on the flammability behavior. ...
The purposes of this work were to: (1) develop preliminary operating data such as expected concentra...
An analysis was performed to determine the acceptability of processing 242-A Evaporator/Crystallizer...
This Waste Analysis Plan (WAP) provides the plan for obtaining information needed for proper waste h...
A bench scale organic liquid (OL) storage system was designed, constructed and tested for the quanti...
This report provides a revised safety analysis for the upgraded 242-A Evaporator (the Evaporator). T...
Health and Safety Research Division, sponsored by EPA, conducted a study to quantify emission factor...
Portions of the 242-A Evaporator on the Hanford Site must be assessed to meet the requirements of th...
Two errors have been identified in the authorization basis for the 242-A Evaporator at the Hanford S...
The purpose of this quality assurance project plan (Plan) is to provide requirements for activities ...
The objectives of this task given in the test specification were to expand the waste feed evaporator...
This report is done by the Environmental Protection Alliance (EPA) on emission factors
This document, the Standards/Requirements Identification Document (S/RID) Phase 2 Assessment Report ...
This document, the Standards/Requirements Identification Document (S/RID) Phase I Assessment Report ...
SIGLEAvailable from British Library Document Supply Centre- DSC:7628.85(WSL-LR--508(AP)M) / BLDSC - ...
This document describes the analysis of the waste evaporation process on the flammability behavior. ...
The purposes of this work were to: (1) develop preliminary operating data such as expected concentra...
An analysis was performed to determine the acceptability of processing 242-A Evaporator/Crystallizer...
This Waste Analysis Plan (WAP) provides the plan for obtaining information needed for proper waste h...
A bench scale organic liquid (OL) storage system was designed, constructed and tested for the quanti...
This report provides a revised safety analysis for the upgraded 242-A Evaporator (the Evaporator). T...
Health and Safety Research Division, sponsored by EPA, conducted a study to quantify emission factor...
Portions of the 242-A Evaporator on the Hanford Site must be assessed to meet the requirements of th...
Two errors have been identified in the authorization basis for the 242-A Evaporator at the Hanford S...
The purpose of this quality assurance project plan (Plan) is to provide requirements for activities ...
The objectives of this task given in the test specification were to expand the waste feed evaporator...
This report is done by the Environmental Protection Alliance (EPA) on emission factors
This document, the Standards/Requirements Identification Document (S/RID) Phase 2 Assessment Report ...
This document, the Standards/Requirements Identification Document (S/RID) Phase I Assessment Report ...
SIGLEAvailable from British Library Document Supply Centre- DSC:7628.85(WSL-LR--508(AP)M) / BLDSC - ...
DOI
Add to ORKG