A site beryllium characterization project was completed at the Rocky Flats Environmental Technology Site (RFETS) in 1997. Information from historical reviews, previous sampling surveys, and a new sampling survey were used to establish a more comprehensive understanding of the locations and levels of beryllium contamination in 35 buildings. A feature of the sampling strategy was to test if process knowledge was a good predictor of where beryllium contamination could be found. Results revealed that this technique was effective at identifying where surface contamination levels might exceed the RFETS smear control level but that it was not effective in identifying where low concentrations of beryllium might be found
Control of workplace exposure to beryllium is a growing issue in the United States and other nations...
This research project was conducted at the National Nuclear Security Administration's Kansas City Pl...
In this dissertation, we investigate the geochemical controls on the behavior of beryllium to better...
ABSTRACT where beryllium contamination was expected to be absent. A site beryllium characterization ...
Since the 1960`s, beryllium machining was performed to make nuclear weapon components at the Departm...
Site visits were made to DOE beryllium handling facilities at the Rocky Flats Plant; Oak Ridge Y-12 ...
This report summarizes the conclusion of regular monitoring of occupied buildings at the Nevada Test...
In response to the report ''Investigation of Beryllium Exposure Cases Discovered at the North Las Ve...
1. Objective: A method to determine whether beryllium (Be) components in surface swipe samples are f...
Approximately 25,000 lbs of lead bricks at Site 300 were assessed by the Site 300 Industrial Hygieni...
Since the U. S. Department of Energy published the DOE Beryllium Rule, 10 CFR 850, in 1999, DOE site...
Because of its unique properties as a lightweight metal with high tensile strength, beryllium is wid...
Beryllium is widely distributed in soils at low levels, but it can also occur naturally in higher c...
Beryllium has been identified in at least 535 of the 1,613 hazardous waste sites that have been prop...
Technical Area-18 (TA-18), also known as Pajarito Site, is located on Los Alamos National Laboratory...
Control of workplace exposure to beryllium is a growing issue in the United States and other nations...
This research project was conducted at the National Nuclear Security Administration's Kansas City Pl...
In this dissertation, we investigate the geochemical controls on the behavior of beryllium to better...
ABSTRACT where beryllium contamination was expected to be absent. A site beryllium characterization ...
Since the 1960`s, beryllium machining was performed to make nuclear weapon components at the Departm...
Site visits were made to DOE beryllium handling facilities at the Rocky Flats Plant; Oak Ridge Y-12 ...
This report summarizes the conclusion of regular monitoring of occupied buildings at the Nevada Test...
In response to the report ''Investigation of Beryllium Exposure Cases Discovered at the North Las Ve...
1. Objective: A method to determine whether beryllium (Be) components in surface swipe samples are f...
Approximately 25,000 lbs of lead bricks at Site 300 were assessed by the Site 300 Industrial Hygieni...
Since the U. S. Department of Energy published the DOE Beryllium Rule, 10 CFR 850, in 1999, DOE site...
Because of its unique properties as a lightweight metal with high tensile strength, beryllium is wid...
Beryllium is widely distributed in soils at low levels, but it can also occur naturally in higher c...
Beryllium has been identified in at least 535 of the 1,613 hazardous waste sites that have been prop...
Technical Area-18 (TA-18), also known as Pajarito Site, is located on Los Alamos National Laboratory...
Control of workplace exposure to beryllium is a growing issue in the United States and other nations...
This research project was conducted at the National Nuclear Security Administration's Kansas City Pl...
In this dissertation, we investigate the geochemical controls on the behavior of beryllium to better...