The primary goal of this research is to produce a pellet fuel from low-sulfur Illinois coal fines which could burn with emissions of less than 1.8 lbs SO{sub 2}/10{sup 6} Btu in stoker-fired boilers. The significance of 1.8 lbs SO{sub 2}/10{sup 6} Btu is that in the Chicago (9 counties) and St. Louis (2 counties) metropolitan areas, industrial users of coal currently must comply with this level of emissions. Stokers are an attractive market for pellets because pellets are well-suited for this application and because western coal is not a competitor in the stoker market. Compliance stoker fuels come from locations such as Kentucky and West Virginia and the price for fuels from these locations is high relative to the current price of Illinois...
Studies have indicated that the potentially hazardous trace elements found in coal have a strong aff...
Illinois coals are prime candidates for use in Integrated Gasification Combined Cycle (IGCC) plants ...
The objective of this project is to produce electrode binder pitch with sulfur content below 0.6 wt%...
The goal of this research is to produce a pellet fuel from low-sulfur Illinois coal fines which coul...
The primary goal of this research is to produce a pellet fuel from low-sulfur Illinois coal fines wh...
The primary purpose of this project is to identify and test concentrates made from preparation plant...
To maintain market share, new uses must be found for Illinois coals in the largest end use area, nam...
Cover title."August 1991."Final technical report: September 1, 1990 through August 31, 1991.Principa...
High efficiencies can be obtained from combined cycle power plants where fuel gas produced in a carb...
"References to publications": p. 62.Introduction -- Summary -- Status of Illinois coals. Historical ...
Fly-ash is produced by all coal-fired utilities, and it must be removed from the plant exhaust gases...
A potentially new use for Illinois coal is its use as a fuel injected into a blast furnace to produc...
A new use for Illinois coal is as fuel injected into a blast furnace to produce molten iron as first...
Studies have indicated that the potentially hazardous trace elements found in coal have a strong aff...
Coal is one of the most abundant energy resources in the US with nearly 800 million tons of it being...
Studies have indicated that the potentially hazardous trace elements found in coal have a strong aff...
Illinois coals are prime candidates for use in Integrated Gasification Combined Cycle (IGCC) plants ...
The objective of this project is to produce electrode binder pitch with sulfur content below 0.6 wt%...
The goal of this research is to produce a pellet fuel from low-sulfur Illinois coal fines which coul...
The primary goal of this research is to produce a pellet fuel from low-sulfur Illinois coal fines wh...
The primary purpose of this project is to identify and test concentrates made from preparation plant...
To maintain market share, new uses must be found for Illinois coals in the largest end use area, nam...
Cover title."August 1991."Final technical report: September 1, 1990 through August 31, 1991.Principa...
High efficiencies can be obtained from combined cycle power plants where fuel gas produced in a carb...
"References to publications": p. 62.Introduction -- Summary -- Status of Illinois coals. Historical ...
Fly-ash is produced by all coal-fired utilities, and it must be removed from the plant exhaust gases...
A potentially new use for Illinois coal is its use as a fuel injected into a blast furnace to produc...
A new use for Illinois coal is as fuel injected into a blast furnace to produce molten iron as first...
Studies have indicated that the potentially hazardous trace elements found in coal have a strong aff...
Coal is one of the most abundant energy resources in the US with nearly 800 million tons of it being...
Studies have indicated that the potentially hazardous trace elements found in coal have a strong aff...
Illinois coals are prime candidates for use in Integrated Gasification Combined Cycle (IGCC) plants ...
The objective of this project is to produce electrode binder pitch with sulfur content below 0.6 wt%...