Add to ORKGSeveral temperature closed-form solutions are developed and presented in this paper. The heating on a one-dimensional thin disk and a two-dimensional thin plate are analyzed. Parametric studies are also included to determine the optimized temperature for the designs
The first synchrotron radiation beam line using a 4-m-long undulator at the 12 GeV storage ring PETR...
Fixed Mask 1 (FM1) and Photon Shutter 2 (PS2) are two of the critical elements on the front end of t...
In January 2013 the Advanced Photon Source (APS), a 7 GeV synchrotron X-ray source, commissioned a S...
White-beam slits are precision high-heat-load devices used on beamlines of the Advanced Photon Sourc...
Abstract. This paper describes the design of an in-vacuum, water-cooled beam stop (X-ray shutter) fo...
In design of high average power lasers one common problem is the heat generated in the active laser ...
Photon shutter 1 (PS1) is one of the most critical elements on the front end of the beamlines at the...
In the past decade, several third-generation synchrotrons x-ray sources have been constructed and co...
An analytical thermal model is proposed to study heat transfers occurring at high power density in X...
BACKGROUND: Microbeam and x-ray FLASH radiation therapy are innovative concepts that promise reduced...
At the Advanced Photon Source (APS), undulator insertion devices are capable of producing x-ray beam...
In this paper, a short description of the synchrotron radiation x-ray sources and the associated pow...
This report contains the following discussions: Introduction: Use of filters and windows in the fron...
Background:Microbeam and x-ray FLASH radiation therapy are innovativeconcepts that promise reduced n...
Fixed mask 2 (FM2) is one of the critical elements on the front end of the beamlines at the Advanced...
The first synchrotron radiation beam line using a 4-m-long undulator at the 12 GeV storage ring PETR...
Fixed Mask 1 (FM1) and Photon Shutter 2 (PS2) are two of the critical elements on the front end of t...
In January 2013 the Advanced Photon Source (APS), a 7 GeV synchrotron X-ray source, commissioned a S...
White-beam slits are precision high-heat-load devices used on beamlines of the Advanced Photon Sourc...
Abstract. This paper describes the design of an in-vacuum, water-cooled beam stop (X-ray shutter) fo...
In design of high average power lasers one common problem is the heat generated in the active laser ...
Photon shutter 1 (PS1) is one of the most critical elements on the front end of the beamlines at the...
In the past decade, several third-generation synchrotrons x-ray sources have been constructed and co...
An analytical thermal model is proposed to study heat transfers occurring at high power density in X...
BACKGROUND: Microbeam and x-ray FLASH radiation therapy are innovative concepts that promise reduced...
At the Advanced Photon Source (APS), undulator insertion devices are capable of producing x-ray beam...
In this paper, a short description of the synchrotron radiation x-ray sources and the associated pow...
This report contains the following discussions: Introduction: Use of filters and windows in the fron...
Background:Microbeam and x-ray FLASH radiation therapy are innovativeconcepts that promise reduced n...
Fixed mask 2 (FM2) is one of the critical elements on the front end of the beamlines at the Advanced...
The first synchrotron radiation beam line using a 4-m-long undulator at the 12 GeV storage ring PETR...
Fixed Mask 1 (FM1) and Photon Shutter 2 (PS2) are two of the critical elements on the front end of t...
In January 2013 the Advanced Photon Source (APS), a 7 GeV synchrotron X-ray source, commissioned a S...