The removal of NO{sub x} from flue gas was studied during this period. About 44% of NO{sub x} in concentrations of about 400 ppm and 100% of NO{sub x} in concentrations below 80 ppm can be removed without any chemical additives. Also some pre experiments have been done on the combined removal of S0{sub 2} and NO. Indications are that the NO in the flue gas helps the removal of S0{sub 2}. Work is continuing on the combined removal at present
The NOXSO process is a dry, post-combustion flue gas treatment technology which uses a regenerable s...
The NOXSO process is a dry, post-combustion flue gas treatment technology which uses a regenerable s...
The NOXSO Process is a dry, post-combustion flue gas treatment technology which uses a regenerable s...
The SO{sub 2} removal efficiency was studied for concentration in the range of 333--3000 ppM (parts ...
A model has been developed to predict the performance of a dielectric-barrier discharge for various ...
NO{sup x} recycle represents one part of the NOXSO process. This process can remove 90% of NO{sub x}...
NO{sub x} recycle represents one part of the NOXSO process. This process can remove 90% of NO{sub x}...
NO{sub x} recycle is one part of the NOXSO process. In this process, 90% of the acid pollutants (NO{...
A gas-phase oxidation method using dielectric barrier discharges (DBDs) has been developed to remove...
The goal of this project is to develop a cost-effective low temperature deNO{sub x} process. Work do...
Enactment of the 1990 Clean Air Act Amendments, as well as passage of legislation at the state level...
A method was proposed to remove NOx and SO2 in flue gas by using the sulfinyl functional group as a ...
The NOXSO Process is a dry, post-combustion flue gas treatment technology which uses a regenerable s...
The NOXSO process is a dry, post-combustion flue gas treatment technology which uses a regenerable s...
The NOXSO Process is a dry, post-combustion flue gas treatment technology which uses a regenerable s...
The NOXSO process is a dry, post-combustion flue gas treatment technology which uses a regenerable s...
The NOXSO process is a dry, post-combustion flue gas treatment technology which uses a regenerable s...
The NOXSO Process is a dry, post-combustion flue gas treatment technology which uses a regenerable s...
The SO{sub 2} removal efficiency was studied for concentration in the range of 333--3000 ppM (parts ...
A model has been developed to predict the performance of a dielectric-barrier discharge for various ...
NO{sup x} recycle represents one part of the NOXSO process. This process can remove 90% of NO{sub x}...
NO{sub x} recycle represents one part of the NOXSO process. This process can remove 90% of NO{sub x}...
NO{sub x} recycle is one part of the NOXSO process. In this process, 90% of the acid pollutants (NO{...
A gas-phase oxidation method using dielectric barrier discharges (DBDs) has been developed to remove...
The goal of this project is to develop a cost-effective low temperature deNO{sub x} process. Work do...
Enactment of the 1990 Clean Air Act Amendments, as well as passage of legislation at the state level...
A method was proposed to remove NOx and SO2 in flue gas by using the sulfinyl functional group as a ...
The NOXSO Process is a dry, post-combustion flue gas treatment technology which uses a regenerable s...
The NOXSO process is a dry, post-combustion flue gas treatment technology which uses a regenerable s...
The NOXSO Process is a dry, post-combustion flue gas treatment technology which uses a regenerable s...
The NOXSO process is a dry, post-combustion flue gas treatment technology which uses a regenerable s...
The NOXSO process is a dry, post-combustion flue gas treatment technology which uses a regenerable s...
The NOXSO Process is a dry, post-combustion flue gas treatment technology which uses a regenerable s...