This document is the report from a November 1948 meeting at Mound Laboratory on the measurement of the density of metallic polonium. Four determinations of the density of Polonium at 25 degrees C have been made. These values are 8.69 gm/cc, 9,34 gm/cc (twice) and 9.20 gm/cc. The probable error was 2%. The material used in the first determination was not subjected to a preliminary purification, which makes the value obtained doubtful. In this instance, production foils were used without a separation from their more volatile constituents. The difference in the reported value from that which appears in the Ad Interim Report is due to a recalculation based on the latest information on the physical constants of polonium. The value of using pure ...
"Issued: July 12, 1963.""Date: June 3, 1963."Includes bibliographical references (page 11).U.S. Atom...
"Report distributed: June 20, 1955.""Report written: April 1955.""LA-1904."Includes bibliographical ...
Densities of Fe-P alloys were measured accurately by the improved sessile drop method. Photographs o...
Determinations of the density and coefficient of thermal expansions of postum (Polonium 210) were at...
Investigation of the physical and chemical properties of polonium important to its behavior and for ...
Research on polonium chemistry and physics is being continued on a reduced scale. Those problems whi...
The density of molten plutonium has been determined by measuring the volume of a known weight of liq...
The assay technique is discussed in detail. The results of three purity determinations are: 94.92 pe...
"Contract W-7405-ENG.36 with the U.S. Atomic Energy Commission.""LA-2358 ; Chemistry--General ; (TID...
This document is a March 1949 Ad Interim Report from the Mound Laboratory on the solution chemistry ...
Measurements of the physical properties, and crystal structure of polonium show that the element is ...
There has been little development regarding analysis of polonium (Po) in environmental samples since...
The discovery of polonium (Po) was first published in July, 1898 by P. Curie and M. Curie. It was th...
The traditional method for plutonium density determination is by measuring the weight loss of the co...
The discovery of polonium (Po) was first published in July, 1898 by P. Curie and M. Curie. It was th...
"Issued: July 12, 1963.""Date: June 3, 1963."Includes bibliographical references (page 11).U.S. Atom...
"Report distributed: June 20, 1955.""Report written: April 1955.""LA-1904."Includes bibliographical ...
Densities of Fe-P alloys were measured accurately by the improved sessile drop method. Photographs o...
Determinations of the density and coefficient of thermal expansions of postum (Polonium 210) were at...
Investigation of the physical and chemical properties of polonium important to its behavior and for ...
Research on polonium chemistry and physics is being continued on a reduced scale. Those problems whi...
The density of molten plutonium has been determined by measuring the volume of a known weight of liq...
The assay technique is discussed in detail. The results of three purity determinations are: 94.92 pe...
"Contract W-7405-ENG.36 with the U.S. Atomic Energy Commission.""LA-2358 ; Chemistry--General ; (TID...
This document is a March 1949 Ad Interim Report from the Mound Laboratory on the solution chemistry ...
Measurements of the physical properties, and crystal structure of polonium show that the element is ...
There has been little development regarding analysis of polonium (Po) in environmental samples since...
The discovery of polonium (Po) was first published in July, 1898 by P. Curie and M. Curie. It was th...
The traditional method for plutonium density determination is by measuring the weight loss of the co...
The discovery of polonium (Po) was first published in July, 1898 by P. Curie and M. Curie. It was th...
"Issued: July 12, 1963.""Date: June 3, 1963."Includes bibliographical references (page 11).U.S. Atom...
"Report distributed: June 20, 1955.""Report written: April 1955.""LA-1904."Includes bibliographical ...
Densities of Fe-P alloys were measured accurately by the improved sessile drop method. Photographs o...