Add to ORKGFourteen adhesives used to bond a glass-fabric-reinforced phenolic resin laminate to steel were tested in order to determine their shear strengths at temperatures from 75 F to 500 F. Fabrication methods were varied to evaluate the effect of placing cloth between the facing surfaces to maintain a uniform bond-line thickness. One glass-fabric supported phenolic adhesive was found to have a shear strength of 3,400 psi at 300 F and over 1,000 psi at 500 F. Strength and fabrication data are tabulated for all adhesives tested
The use of reinforcements in adhesive joints makes the stress distribution more uniform, improving t...
The analysis presented in this paper is focused on problems of bond strength as an overall bond qual...
In this paper, comparisons of the adhesive strengths of two commercially available adhesives, epoxy ...
Fourteen adhesives used to bond a glass-fabric-reinforced phenolic resin laminate to steel were test...
The flexural properties of samples of glass-fabric laminates were determined for several conditions ...
Thesis (M.S.)--Wichita State University, Dept. of Aerospace Engineering."July 2006."Includes bibliog...
Tests on the dependence of glues shear strength on: gluing temperature, keeping time before testing,...
A glued joint is a suitable connection between a glass pane and a framework. The mechanical properti...
Glass products are widely employed in transparent facade and roof structures as tertiary non-structu...
Thesis motive is to experimentally analyse adhesive joint strength and adhesive bonding on glass fib...
Interest in polyethylene and polypropylene bonding has increased in the last years. However, adhesiv...
The aim of this work was to evaluate the adhesiveness of uncoated and zinc-electrogalvanized steel s...
A study was performed to observe how changes in temperature and substrate material affected the stre...
The use of large glass areas is a hallmark of modern architecture, and glass is also used as a struc...
The objective of this research is to characterize mechanical and physical behaviors of adhesives bon...
The use of reinforcements in adhesive joints makes the stress distribution more uniform, improving t...
The analysis presented in this paper is focused on problems of bond strength as an overall bond qual...
In this paper, comparisons of the adhesive strengths of two commercially available adhesives, epoxy ...
Fourteen adhesives used to bond a glass-fabric-reinforced phenolic resin laminate to steel were test...
The flexural properties of samples of glass-fabric laminates were determined for several conditions ...
Thesis (M.S.)--Wichita State University, Dept. of Aerospace Engineering."July 2006."Includes bibliog...
Tests on the dependence of glues shear strength on: gluing temperature, keeping time before testing,...
A glued joint is a suitable connection between a glass pane and a framework. The mechanical properti...
Glass products are widely employed in transparent facade and roof structures as tertiary non-structu...
Thesis motive is to experimentally analyse adhesive joint strength and adhesive bonding on glass fib...
Interest in polyethylene and polypropylene bonding has increased in the last years. However, adhesiv...
The aim of this work was to evaluate the adhesiveness of uncoated and zinc-electrogalvanized steel s...
A study was performed to observe how changes in temperature and substrate material affected the stre...
The use of large glass areas is a hallmark of modern architecture, and glass is also used as a struc...
The objective of this research is to characterize mechanical and physical behaviors of adhesives bon...
The use of reinforcements in adhesive joints makes the stress distribution more uniform, improving t...
The analysis presented in this paper is focused on problems of bond strength as an overall bond qual...
In this paper, comparisons of the adhesive strengths of two commercially available adhesives, epoxy ...