Report presents the results of an investigation conducted in the Langley 19-foot pressure tunnel to determine the maximum lift and stalling characteristics of two thin wings equipped with several types of flaps. Split, single slotted, and double slotted flaps were tested on one wing which had NACA 65-210 airfoil sections and split and double slotted flaps were tested on the other, which had NACA 64-210 airfoil sections. Both wings were zero sweep, an aspect ratio of 9, and a taper ratio of 0.4
Report presents the results of an investigation conducted in the Langley 19-foot pressure tunnel to ...
An investigation was conducted in a low-turbulence pressure tunnel to determine the two-dimensional ...
A 24-inch chord wooden model equipped with a slotted flap (submitted by the Curtiss-Wright Corporati...
An investigation has been conducted in the Langley 19-foot pressure tunnel to determine the maximum ...
An investigation was conducted in the NACA 19-foot pressure wind tunnel of a rectangular wing having...
Tests of a wing-fuselage combinations incorporating NACA 65-series airfoil sections were conducted i...
Tests were made on a model wing with three different sized split trailing-edged flaps, in the NACA 7...
An investigation has been made in the Langley two-dimensional low-turbulence tunnel to develop the o...
Report presents the results of an investigation conducted in the Langley 19-foot pressure tunnel to ...
An investigation was conducted in a low-turbulence pressure tunnel to determine the two-dimensional ...
A 24-inch chord wooden model equipped with a slotted flap (submitted by the Curtiss-Wright Corporati...
An investigation has been conducted in the Langley 19-foot pressure tunnel to determine the maximum ...
An investigation was conducted in the NACA 19-foot pressure wind tunnel of a rectangular wing having...
Tests of a wing-fuselage combinations incorporating NACA 65-series airfoil sections were conducted i...
Tests were made on a model wing with three different sized split trailing-edged flaps, in the NACA 7...
An investigation has been made in the Langley two-dimensional low-turbulence tunnel to develop the o...
Report presents the results of an investigation conducted in the Langley 19-foot pressure tunnel to ...
An investigation was conducted in a low-turbulence pressure tunnel to determine the two-dimensional ...
A 24-inch chord wooden model equipped with a slotted flap (submitted by the Curtiss-Wright Corporati...