Objectives: Orthodontic mini-implants (OMIs) are increasingly used in orthodontics but can fail for various reasons. This study investigates the effects of OMI design characteristics on the mechanical properties in artificial bone. Material and Methods: Twelve self-drilling OMIs (2 small, 6 medium, 4 large) from 8 manufacturers were tested for their primary stability in simulated medium-high cancellous bone and the risk to fracture in high-density methacrylate blocks. For the assessments of the maximum insertion torque (IT) and torsional fracture (TF) 5 of each OMI were used and for the pull-out strength (POS) 10. The OMIs were inserted with a torque screwdriver (12 sec/360°) until the bottom at 8 mm depth was reached. OMI designs wer...
This study evaluated fracture torque by torsion, in relation to the length and diameter of orthodont...
AbstractThis study evaluates the influence of different implant materials on the primary stability o...
The aim of this study is to comprehensively analyze the potential factors affecting the failure rate...
Objective: Orthodontic mini-implants (OMIs) are increasingly used in orthodontics but can fail for v...
Background: In orthodontic procedures, mini-implants are routinely used as temporary anchorage devic...
Objective: To determine the effects of insertion angle (IA) and thread type on the fracture properti...
Introduction: Self-drilling mini-implants are commonly used in orthodontics, but there is little inf...
Background: Clinical guidelines are lacking for the use of orthodontic mini-implants (OMIs) in terms...
2019-03-12Objective: To investigate the effects of insertion speed and pre-drilling on the mechanica...
Objectives: Mini-implants (MIs) are now routinely used in orthodontic treatments; however, compared...
Background/purpose: Primary stability of orthodontic miniscrew system is of great importance in main...
Purpose: This study aimed to compare the risk of orthodontic mini-implant (OMI) failure between maxi...
© 2015 by The EH Angle Education and Research Foundation, Inc. Objective: To investigate the fractur...
AIM OF THE STUDY: The aim of our study was to evaluate the geometrical design characteristics (lead...
The increasing demand for orthodontic treatment over recent years has led to a growing need for the ...
This study evaluated fracture torque by torsion, in relation to the length and diameter of orthodont...
AbstractThis study evaluates the influence of different implant materials on the primary stability o...
The aim of this study is to comprehensively analyze the potential factors affecting the failure rate...
Objective: Orthodontic mini-implants (OMIs) are increasingly used in orthodontics but can fail for v...
Background: In orthodontic procedures, mini-implants are routinely used as temporary anchorage devic...
Objective: To determine the effects of insertion angle (IA) and thread type on the fracture properti...
Introduction: Self-drilling mini-implants are commonly used in orthodontics, but there is little inf...
Background: Clinical guidelines are lacking for the use of orthodontic mini-implants (OMIs) in terms...
2019-03-12Objective: To investigate the effects of insertion speed and pre-drilling on the mechanica...
Objectives: Mini-implants (MIs) are now routinely used in orthodontic treatments; however, compared...
Background/purpose: Primary stability of orthodontic miniscrew system is of great importance in main...
Purpose: This study aimed to compare the risk of orthodontic mini-implant (OMI) failure between maxi...
© 2015 by The EH Angle Education and Research Foundation, Inc. Objective: To investigate the fractur...
AIM OF THE STUDY: The aim of our study was to evaluate the geometrical design characteristics (lead...
The increasing demand for orthodontic treatment over recent years has led to a growing need for the ...
This study evaluated fracture torque by torsion, in relation to the length and diameter of orthodont...
AbstractThis study evaluates the influence of different implant materials on the primary stability o...
The aim of this study is to comprehensively analyze the potential factors affecting the failure rate...