Application of persulfate-releasing barrier to remediate MTBE and benzene contaminated groundwater

[[abstract]]The objective of this study was to assess the potential of using an in situ oxidation barrier system to remediate gasoline-contaminated groundwater. The passive remedial system included a persulfate-releasing barrier containing persulfate-releasing materials to release persulfate for contaminant oxidation. Bench experiments were performed to determine the components and persulfate-releasing rate of the persulfate-releasing materials. Column experiments were conducted to evaluate the effectiveness of the designed persulfate-releasing materials on the control of petroleum-hydrocarbon plume. In this study, methyl tert-butyl ether (MTBE) and benzene were used as the target compounds. The optimal persulfate releasing rate was obtained when the mass ratio of persulfate/cement/sand/water was 1/1/0.16/0.5, and the rate varied from 31 to 8 mg persulfate per day per g of material. Significant amounts of MTBE and benzene were removed through the oxidation process due to the release of persulfate, and the produced tert-butyl formate (TBF) and tert-butyl alcohol (TBA), byproducts of MTBE, were further oxidized in the system. Results suggest that the oxidation rate would be affected by the oxidant reduction potential and concentrations of ferrous iron and persulfate. (C) 2010 Elsevier B.V. All rights reserved.[[note]]SC