AUTOMATED HYDRAULIC PRESS FOR WASTE

Cilj naloge je prikazati in opisati izdelavo avtomatizirane hidravlične stiskalnice za odpadno embalažo s krmilnikom Siemens LOGO!. Naloga stroja je, da odpadkom čimbolj zmanjša volumen in s tem zmanjša stroške skladiščenja in transporta. Podrobno je predstavljena strojna in programska oprema, ki je bila uporabljena za izdelavo stroja. Opisano je delovanje stroja in vseh gradnikov, ki ga sestavljajo, ter izzivi, s katerimi smo se srečali pri izdelavi. Na koncu so zapisane še ugotovitve pri samem zagonu.The aim of this thesis is to describe and present the making of an automated hydraulic press for waste with Siemens LOGO! Controller. The task of the machine is to reduce the volume of waste for as much as possible and reduce the cost of storage and transport. The software and the individual hardware components that were used in the making of the press are described in detail. The functioning of the press is also described as well as all the challenges we faced in the making of the press. At the end there is a description of the testing of the machine