INTRODUSE CAD/CAM PROGRAM PACKAGE INTO FACTORY

V diplomskem delu je prikazan postopek uvedbe CAD/CAM programskega orodja v podjetje. Cilj diplomskega dela je primerjava med ročnim programiranjem in programiranjem s pomočjo CAM sistema ter povečanje produktivnosti proizvodnje pri izdelavi serijskih izdelkov. Z uvedbo programskega orodja bi predvsem skrajšali obdelovalne čase izdelkov, ki se izdelujejo v različnih serijah. Diplomsko delo opisuje osnovne značilnosti CAD/CAM sistemov, podjetje Medicop d.o.o, programska orodja in njihovo primerjavo. Na osnovi primerjave sem se odločil, kateri paket je najbolj ugoden za podjetje. S pomočjo CAD/CAM programskega orodja sem izdelal Blok KZO. Izdelan je bil s pomočjo programskega orodja Pro/Engineer Wildfire 5.The thesis discusses the introduction procedure of CAD/CAM software into the company. The aim of the thesis is a comparison between manual programming and programming using the CAM system and the productivity increase of manufacturing in the manufacture of serial products. With the introduction of software tools we would primarily shorten the time of processing products, which are manufactured in different batches. The thesis describes basic features of CAD/CAM systems, the company Medicop, Ltd., software tools and compares them. Based on the comparison I\u27ve decided which package is the most beneficial for the company. With the help of CAD/CAM software I have built a KZO block. It was made using the software Pro/Engineer Wildfire 5