Roller skewing measurements in cylindrical roller bearings /

Lubrication of optimized-design tapered-roller bearings to 2.4 million DN /

Parker, Richard J. (Richard Jay), 1937-
Signer, Hans R.
Pinel, Stanley I.
United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch.

January 1980

"August 1980"--Cover.Includes bibliographical references.Mode of access: Internet

Experimental performance of 75-millimeter-bore arched outer-race ball bearings to 2.1 million DN /

Coe, Harold H.
Lewis Research Center.

January 1976

Prepared at Lewis Research Center.Cover title.Includes bibliographical references (p. 9-10).Mode of ...

Effect of speed and press fit on fatigue life of roller-bearing inner-race contact /

Coe, Harold H.
Zaretsky, Erwin V.
Lewis Research Center.

January 1985

Prepared at Lewis Research Center."July 1985"--Cover.Includes bibliographical references (p. 10).Mod...

Roller to separator contact forces and cage to shaft speed ratios in roller bearings /

Nypan, Lester J.
Lewis Research Center.
California State University, Northridge.
United States. National Aeronautics and Space Administration. Scientific and Technical Information Office.

January 1978

Sept. 1978.Grant NSG-3065.Includes bibliographical references.Mode of access: Internet

Rolling element skew measurement in a spherical roller bearing utilizing a CPD probe

Osorno, Daniel

August 2005

This thesis incorporates an array of Contact Potential Difference (CPD) sensors to measure and monit...

Roller skewing measurements in cylindrical roller bearings

Nypan, L. J.

January 1981

Measurements of roller skewing in a 118 mm bore roller bearing operating at shaft speeds to 12,000 r...

On the Measurement of Roller Skew of Tapered Roller Bearings

Falodi, A.
Chen, Yong
Caspall, Martin
Earthrowl, Brian
Dell, David

November 2012

Roller skew in roller bearings can cause heat generation and reduce bearing life. Therefore, design ...

Comparison of predicted and experimental performance of large-bore roller bearing operation to 3.0 million DN /

Coe, Harold H.
Schuller, Fredrick T.
United States. National Aeronautics and Space Administration. Scientific and Technical Information Office.
Lewis Research Center.

January 1980

STAR category 37."January 1980--Cover."Lewis Research Center."Includes bibliographical references.Mo...

Kinematic stability of roller pairs in free-rolling contact /

Savage, M. (Michael)
Loewenthal, Stuart H.
U.S. Army Air Mobility Research and Development Laboratory.
Lewis Research Center.

January 1976

Prepared at Lewis Research Center and the U.S. Army Air Mobility R&D Laboratory.Cover title.Includes...

Friction and carrying capacity of ball and roller bearings /

Whittemore, Herbert Lucius, 1876-
Petrenko, Serge Nicolas, joint author.
United States. National Bureau of Standards. Technologic Papers.

January 1921

"These tests were undertaken by the Bureau of Standards, at the request of the Navy Department, to o...

Torsion, compression, and bending tests of tubular sections machines from 75S-T6 rolled round rod /

Moore, R. L.
Clark, J. W.
Aluminum Company of America.
United States. National Adviosry Committee for Aeronautics. NACA research memorandum.

January 1952

"November 12, 1952."Includes bibliographical references (p. 11).Mode of access: Internet

Measurement of rolling friction by a damped oscillator /

Dayan, Moshe.
Buckley, Donald H.
United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch.

January 1983

STAR category 37.Distributed to depository libraries in microfiche."December 1983"--Cover.Includes b...

Experimental evaluation of the series-hybrid rolling-element bearing /

Parker, Richard J. (Richard Jay), 1937-
Lewis Research Center.

Prepared at Lewis Research Center."December 1970."Cover title.Includes bibliographical references (p...

Operating characteristics of 120-millimeter-bore ball bearings at 3x10⁶ DN /

Zaretsky, Erwin V.
Signer, Hans R.
Bamberger, Eric N.

January 1974

Prepared at Lewis Research Center.Cover title.Includes bibliographical references (p. 28-29).Mode of...

Deflection and critical velocity of rollers

Shelton, J. J.

June 1995

A coordinate system with its origin at the center of the roller, and with the origin moving as the r...

Lubrication of optimized-design tapered-roller bearings to 2.4 million DN /

Parker, Richard J. (Richard Jay), 1937-
Signer, Hans R.
Pinel, Stanley I.
United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch.

January 1980

"August 1980"--Cover.Includes bibliographical references.Mode of access: Internet

Experimental performance of 75-millimeter-bore arched outer-race ball bearings to 2.1 million DN /

Coe, Harold H.
Lewis Research Center.

January 1976

Prepared at Lewis Research Center.Cover title.Includes bibliographical references (p. 9-10).Mode of ...

Effect of speed and press fit on fatigue life of roller-bearing inner-race contact /

Coe, Harold H.
Zaretsky, Erwin V.
Lewis Research Center.

January 1985

Prepared at Lewis Research Center."July 1985"--Cover.Includes bibliographical references (p. 10).Mod...

Roller to separator contact forces and cage to shaft speed ratios in roller bearings /

Nypan, Lester J.
Lewis Research Center.
California State University, Northridge.
United States. National Aeronautics and Space Administration. Scientific and Technical Information Office.

January 1978

Sept. 1978.Grant NSG-3065.Includes bibliographical references.Mode of access: Internet

Rolling element skew measurement in a spherical roller bearing utilizing a CPD probe

Osorno, Daniel

August 2005

This thesis incorporates an array of Contact Potential Difference (CPD) sensors to measure and monit...

Roller skewing measurements in cylindrical roller bearings

Nypan, L. J.

January 1981

Measurements of roller skewing in a 118 mm bore roller bearing operating at shaft speeds to 12,000 r...

On the Measurement of Roller Skew of Tapered Roller Bearings

Falodi, A.
Chen, Yong
Caspall, Martin
Earthrowl, Brian
Dell, David

November 2012

Roller skew in roller bearings can cause heat generation and reduce bearing life. Therefore, design ...

Comparison of predicted and experimental performance of large-bore roller bearing operation to 3.0 million DN /

Coe, Harold H.
Schuller, Fredrick T.
United States. National Aeronautics and Space Administration. Scientific and Technical Information Office.
Lewis Research Center.

January 1980

STAR category 37."January 1980--Cover."Lewis Research Center."Includes bibliographical references.Mo...

Kinematic stability of roller pairs in free-rolling contact /

Savage, M. (Michael)
Loewenthal, Stuart H.
U.S. Army Air Mobility Research and Development Laboratory.
Lewis Research Center.

January 1976

Prepared at Lewis Research Center and the U.S. Army Air Mobility R&D Laboratory.Cover title.Includes...

Friction and carrying capacity of ball and roller bearings /

Whittemore, Herbert Lucius, 1876-
Petrenko, Serge Nicolas, joint author.
United States. National Bureau of Standards. Technologic Papers.

January 1921

"These tests were undertaken by the Bureau of Standards, at the request of the Navy Department, to o...

Torsion, compression, and bending tests of tubular sections machines from 75S-T6 rolled round rod /

Moore, R. L.
Clark, J. W.
Aluminum Company of America.
United States. National Adviosry Committee for Aeronautics. NACA research memorandum.

January 1952

"November 12, 1952."Includes bibliographical references (p. 11).Mode of access: Internet

Measurement of rolling friction by a damped oscillator /

Dayan, Moshe.
Buckley, Donald H.
United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch.

January 1983

STAR category 37.Distributed to depository libraries in microfiche."December 1983"--Cover.Includes b...

Experimental evaluation of the series-hybrid rolling-element bearing /

Parker, Richard J. (Richard Jay), 1937-
Lewis Research Center.

Prepared at Lewis Research Center."December 1970."Cover title.Includes bibliographical references (p...

Operating characteristics of 120-millimeter-bore ball bearings at 3x10⁶ DN /

Zaretsky, Erwin V.
Signer, Hans R.
Bamberger, Eric N.

January 1974

Prepared at Lewis Research Center.Cover title.Includes bibliographical references (p. 28-29).Mode of...

Deflection and critical velocity of rollers

Shelton, J. J.

June 1995

A coordinate system with its origin at the center of the roller, and with the origin moving as the r...

Lubrication of optimized-design tapered-roller bearings to 2.4 million DN /

Parker, Richard J. (Richard Jay), 1937-
Signer, Hans R.
Pinel, Stanley I.
United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch.

January 1980

"August 1980"--Cover.Includes bibliographical references.Mode of access: Internet

Experimental performance of 75-millimeter-bore arched outer-race ball bearings to 2.1 million DN /

Coe, Harold H.
Lewis Research Center.

January 1976

Prepared at Lewis Research Center.Cover title.Includes bibliographical references (p. 9-10).Mode of ...

Effect of speed and press fit on fatigue life of roller-bearing inner-race contact /

Coe, Harold H.
Zaretsky, Erwin V.
Lewis Research Center.

January 1985

Prepared at Lewis Research Center."July 1985"--Cover.Includes bibliographical references (p. 10).Mod...

Roller skewing measurements in cylindrical roller bearings /

Abstract

Extracted data

Roller skewing measurements in cylindrical roller bearings /

Abstract

Extracted data

Related items

Related items