Creep and residual mechanical properties of cast superalloys and oxide dispersion stengthened alloys /

The creep properties of a series of zinc-rich zinc-aluminium alloys

Mir, A.A.

January 1998

Available from British Library Document Supply Centre-DSC:DXN017069 / BLDSC - British Library Docume...

The mechanical properties at 800,̊ 1000,̊ and 1200 ̊F of two superalloys under consideration for use in the supersonic transport /

Cullen, T. M.
Freeman, J. W.
University of Michigan.
United States. National Aeronautics and Space Administration.

"September 1964"--- cover.Includes bibliographical references (p. 17).Prepared by University of Mich...

Tensile-creep properties at 500 F of zirconium and a 3.66 per cent uranium alloy of zirconium /

Schwope, A. D.
Muehlenkamp, G. T.
Battelle Memorial Institute.
U.S. Atomic Energy Commission. Technical Information Service.

"Date declassified: August 30, 1955"--P. [2] of cover."Contract No. W-7405-eng-92.""November 1, 1952...

Statistical analysis of high-temperature creep-rate data for alloys of tantalum, molybdenum, and columbium /

Maag, William L.
Mattson, William F.
Lewis Research Center.

Prepared at Lewis Research Center."September 1969."Cover title.Includes bibliographical references (...

Tensile properties and creep strength of three aluminum alloys exposed up to 25,000 hours at 200 ̊to 400 ̊F (370 ̊to 480 ̊K)

Royster, Dick M.
United States. National Aeronautics and Space Administration.
Langley Research Center.

Prepared at Langley Research Center."January 1969"--Cover.Includes bibliographical references (p. 12...

Long-time creep behavior of the tantalum alloy Astar 811C /

Klopp, William D.
Sheffler, Keith D.
Titran, Robert H.
Lewis Research Center.
United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch.

January 1980

"Sept. 1980."Lewis Research Center."Includes bibliographical references.Mode of access: Internet

Compressive and tensile creep of 7075-T6 and 2024-T3 aluminum-alloy sheet /

Heimerl, George J.
Farquhar, John, 1932-
Langley Research Center.

Prepared at Langley Research Center."December 1959."Cover title.Includes bibliographical references ...

Creep and residual mechanical properties of cast superalloys and oxide dispersion strengthened alloys

Whittenberger, J. D.

February 1981

Tensile, stress-rupture, creep, and residual tensile properties after creep testing were determined ...

Creep of aluminum-lithium alloy /

Marshall, Robert P.
U.S. Atomic Energy Commission.
Savannah River Laboratory.
E.I. du Pont de Nemours & Company.

"Metals, Ceramics, and Materials (TID-4500, 17th Ed.).""Printed for the United States Atomic Energy ...

Tensile and creep properties of titanium-vanadium, titanium-molybdenum, and titanium-niobium /

Gray, Hugh R.
Lewis Research Center.

January 1975

Prepared at Lewis Research Center.Cover title.Includes bibliographical references (p. 9-10).Mode of ...

Ductility mechanisms and superplasticity in chromium alloys /

Stephens, Joseph R.
Klopp, William D.
Lewis Research Center.

Prepared at Lewis Research Center."January 1968"--Cover.Includes bibliographical references (p. 29-3...

Effects of creep stress on particulate aluminum-copper alloys /

Underwood, Ervin E., 1918-
Manning, G. K. (George K.)
Battelle Memorial Institute.

Prepared at Battelle Memorial Institute."September 1959."Cover title.Includes bibliographical refere...

Creep deformation in nickel base superalloy single crystals

Pollock, T. M. (Tresa M.)

January 1989

Thesis: Ph. D., Massachusetts Institute of Technology, Department of Materials Science and Engineeri...

Mechanical properties and oxidation and corrosion resistance of reduced chromium 304 stainless steel alloys /

Stephens, Joseph R.
Gyorgak, Charles A.
Barrett, Charles A.
Lewis Research Center.
United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch.

January 1979

"November 1979"--Cover."Lewis Research Center."Includes bibliographical references.Mode of access: I...

Sensitivity of the creep-rupture properties of nickel-base superalloy sheet to sharp edge-notches in the temperature range of 1000 ̊- 1400 ̊F /

Wilson, Davis J.
Goodill, P. D.
Freeman, J. W.
Lewis Research Center.
University of Michigan.
United States. National Aeronautics and Space Administration.

January 1969

"January 1969."Includes bibliographical references."Prepared under grant no.Mode of access: Internet

The creep properties of a series of zinc-rich zinc-aluminium alloys

Mir, A.A.

January 1998

Available from British Library Document Supply Centre-DSC:DXN017069 / BLDSC - British Library Docume...

The mechanical properties at 800,̊ 1000,̊ and 1200 ̊F of two superalloys under consideration for use in the supersonic transport /

Cullen, T. M.
Freeman, J. W.
University of Michigan.
United States. National Aeronautics and Space Administration.

"September 1964"--- cover.Includes bibliographical references (p. 17).Prepared by University of Mich...

Tensile-creep properties at 500 F of zirconium and a 3.66 per cent uranium alloy of zirconium /

Schwope, A. D.
Muehlenkamp, G. T.
Battelle Memorial Institute.
U.S. Atomic Energy Commission. Technical Information Service.

"Date declassified: August 30, 1955"--P. [2] of cover."Contract No. W-7405-eng-92.""November 1, 1952...

Statistical analysis of high-temperature creep-rate data for alloys of tantalum, molybdenum, and columbium /

Maag, William L.
Mattson, William F.
Lewis Research Center.

Prepared at Lewis Research Center."September 1969."Cover title.Includes bibliographical references (...

Tensile properties and creep strength of three aluminum alloys exposed up to 25,000 hours at 200 ̊to 400 ̊F (370 ̊to 480 ̊K)

Royster, Dick M.
United States. National Aeronautics and Space Administration.
Langley Research Center.

Prepared at Langley Research Center."January 1969"--Cover.Includes bibliographical references (p. 12...

Long-time creep behavior of the tantalum alloy Astar 811C /

Klopp, William D.
Sheffler, Keith D.
Titran, Robert H.
Lewis Research Center.
United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch.

January 1980

"Sept. 1980."Lewis Research Center."Includes bibliographical references.Mode of access: Internet

Compressive and tensile creep of 7075-T6 and 2024-T3 aluminum-alloy sheet /

Heimerl, George J.
Farquhar, John, 1932-
Langley Research Center.

Prepared at Langley Research Center."December 1959."Cover title.Includes bibliographical references ...

Creep and residual mechanical properties of cast superalloys and oxide dispersion strengthened alloys

Whittenberger, J. D.

February 1981

Tensile, stress-rupture, creep, and residual tensile properties after creep testing were determined ...

Creep of aluminum-lithium alloy /

Marshall, Robert P.
U.S. Atomic Energy Commission.
Savannah River Laboratory.
E.I. du Pont de Nemours & Company.

"Metals, Ceramics, and Materials (TID-4500, 17th Ed.).""Printed for the United States Atomic Energy ...

Tensile and creep properties of titanium-vanadium, titanium-molybdenum, and titanium-niobium /

Gray, Hugh R.
Lewis Research Center.

January 1975

Prepared at Lewis Research Center.Cover title.Includes bibliographical references (p. 9-10).Mode of ...

Ductility mechanisms and superplasticity in chromium alloys /

Stephens, Joseph R.
Klopp, William D.
Lewis Research Center.

Prepared at Lewis Research Center."January 1968"--Cover.Includes bibliographical references (p. 29-3...

Effects of creep stress on particulate aluminum-copper alloys /

Underwood, Ervin E., 1918-
Manning, G. K. (George K.)
Battelle Memorial Institute.

Prepared at Battelle Memorial Institute."September 1959."Cover title.Includes bibliographical refere...

Creep deformation in nickel base superalloy single crystals

Pollock, T. M. (Tresa M.)

January 1989

Thesis: Ph. D., Massachusetts Institute of Technology, Department of Materials Science and Engineeri...

Mechanical properties and oxidation and corrosion resistance of reduced chromium 304 stainless steel alloys /

Stephens, Joseph R.
Gyorgak, Charles A.
Barrett, Charles A.
Lewis Research Center.
United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch.

January 1979

"November 1979"--Cover."Lewis Research Center."Includes bibliographical references.Mode of access: I...

Sensitivity of the creep-rupture properties of nickel-base superalloy sheet to sharp edge-notches in the temperature range of 1000 ̊- 1400 ̊F /

Wilson, Davis J.
Goodill, P. D.
Freeman, J. W.
Lewis Research Center.
University of Michigan.
United States. National Aeronautics and Space Administration.

January 1969

"January 1969."Includes bibliographical references."Prepared under grant no.Mode of access: Internet

The creep properties of a series of zinc-rich zinc-aluminium alloys

Mir, A.A.

January 1998

Available from British Library Document Supply Centre-DSC:DXN017069 / BLDSC - British Library Docume...

The mechanical properties at 800,̊ 1000,̊ and 1200 ̊F of two superalloys under consideration for use in the supersonic transport /

Cullen, T. M.
Freeman, J. W.
University of Michigan.
United States. National Aeronautics and Space Administration.

"September 1964"--- cover.Includes bibliographical references (p. 17).Prepared by University of Mich...

Tensile-creep properties at 500 F of zirconium and a 3.66 per cent uranium alloy of zirconium /

Schwope, A. D.
Muehlenkamp, G. T.
Battelle Memorial Institute.
U.S. Atomic Energy Commission. Technical Information Service.

"Date declassified: August 30, 1955"--P. [2] of cover."Contract No. W-7405-eng-92.""November 1, 1952...

Creep and residual mechanical properties of cast superalloys and oxide dispersion stengthened alloys /

Abstract

Extracted data

Creep and residual mechanical properties of cast superalloys and oxide dispersion stengthened alloys /

Abstract

Extracted data

Related items

Related items