Mechanical properties and oxidation and corrosion resistance of reduced chromium 304 stainless steel alloys /

The relative stress-corrosion cracking susceptibility of candidate aluminum-lithium alloys for aerospace applications /

Pizzo, Patrick P.
United States. National Aeronautics and Space Administration. Scientific and Technical Information Office.
Advanced Research and Applications Corporation.
Ames Research Center.

January 1982

"June 1982"--Cover."Advanced Research and Applications Corporation."Includes bibliographical referen...

High-temperature tensile properties of wrought sintered tungsten /

Sikora, Paul F.
Hall, Robert W., 1937-
Lewis Research Center.

Prepared at Lewis Research Center."September 1959."Cover title.Includes bibliographical references (...

The variation of corrosion potential with time for coated metal surfaces /

Danford, Merlin D.
Knockemus, Ward W.
George C. Marshall Space Flight Center.

January 1986

Prepared at George C. Marshall Space Flight Center."September 1986"--Cover.Includes bibliographical ...

An investigation of mechanical properties of chromium, chromium- rhenium, and derived alloys /

Gilbert, A.
Horonjeff, Robert.
Penzien, Joseph.
Battelle Memorial Institute.
United States. National Aeronautics and Space Administration.

"November 1964"--- cover.Includes bibliographical references (p. 49-51).Prepared by Battelle Memoria...

Ductility mechanisms and superplasticity in chromium alloys /

Stephens, Joseph R.
Klopp, William D.
Lewis Research Center.

Prepared at Lewis Research Center."January 1968"--Cover.Includes bibliographical references (p. 29-3...

Tensile properties of palladium-silver alloys with absorbed hydrogen /

Smith, Robert J.
Otterson, Dumas A.
Lewis Research Center.

January 1975

Prepared at Lewis Research Center.Cover title.Includes bibliographical references (p. 8-9).Mode of a...

Resistance of nickel-chromium-aluminum alloys to cyclic oxidation at 1100 ̊and 1200 ̊C. /

Barrett, Charles A.
Lowell, Carl E., joint author.
United States. National Aeronautics and Space Administration.
Lewis Research Center.

January 1976

Cover title.Includes bibliographical references (p. 16).Mode of access: Internet

Smooth and sharp-notch tensile properties of cold-reduced AISI 301 and 304L stainless-steel sheet at 75 degrees, -320 degrees and -423 degrees F /

Hanson, Morgan P.
United States. National Aeronautics and Space Administration.

Cover title."February 1961."Materials, engineering; Physics, solid state; Stresses and loads; Struct...

Modified ferritic iron alloys with improved high-temperature mechanical properties and oxidation resistance /

Oldrieve, Robert E.
Lewis Research Center.

January 1975

Prepared at Lewis Research Center.Cover title.Includes bibliographical references (p. 13).Mode of ac...

Lubrication of corrosion-resistant alloys by mixtures of halogen-containing gases at temperatures up to 1200 ̊F /

Buckley, Donald H.
Johnson, Robert L. (Robert Lewis), 1929-
Lewis Research Center.

Prepared at Lewis Research Center."November 1959."Cover title.Includes bibliographical references (p...

Thermal-fatigue and oxidation resistance of cobalt-modified Udimet 700 alloy /

Bizon, Peter T.
Barrow, Betty J.
Lewis Research Center.

January 1986

Prepared at Lewis Research Center."April 1986"--Cover.Includes bibliographical references (p. 12).Mo...

High-temperature mechanical properties of a zirconium-modified, precipitation-strengthened nickel-30 percent copper alloy /

Whittenberger, J. Daniel (John Daniel)
Lewis Research Center.

January 1974

Prepared at Lewis Research Center.Cover title.Includes bibliographical references (p. 8-9).Mode of a...

Heat treatment for improved stress-corrosion resistance of 17-7 ph stainless steel /

Johnson, Carl R.
Grimsley, John D.
Goddard Space Flight Center.
United States. National Aeronautics and Space Administration.

January 1968

Cover title."July 1968."Includes bibliographical references (p. 7).Mode of access: Internet

Improved adherence of sputtered titanium carbide coatings on nickel- and titanium-base alloys /

Wheeler, Donald R.
Brainard, William A.
Lewis Research Center.
United States. National Aeronautics and Space Administration. Scientific and Technical Information Office.

January 1979

"April 1979"--Cover."Lewis Research Center."Includes bibliographical references.Mode of access: Inte...

Mechanical properties and resistance to corrosion of rolled light alloys of aluminum and magnesium with copper, with nickel, and with manganese /

Merica, Paul Dyer, 1889-
Finn, Alfred Nelson, 1882- joint author.
Waltenberg, Romaine George, 1889- joint author.
United States. National Bureau of Standards. Technologic Papers.

January 1919

Running title: Properties of light alloys.Includes bibliographical references.Mode of access: Intern...

The relative stress-corrosion cracking susceptibility of candidate aluminum-lithium alloys for aerospace applications /

Pizzo, Patrick P.
United States. National Aeronautics and Space Administration. Scientific and Technical Information Office.
Advanced Research and Applications Corporation.
Ames Research Center.

January 1982

"June 1982"--Cover."Advanced Research and Applications Corporation."Includes bibliographical referen...

High-temperature tensile properties of wrought sintered tungsten /

Sikora, Paul F.
Hall, Robert W., 1937-
Lewis Research Center.

Prepared at Lewis Research Center."September 1959."Cover title.Includes bibliographical references (...

The variation of corrosion potential with time for coated metal surfaces /

Danford, Merlin D.
Knockemus, Ward W.
George C. Marshall Space Flight Center.

January 1986

Prepared at George C. Marshall Space Flight Center."September 1986"--Cover.Includes bibliographical ...

An investigation of mechanical properties of chromium, chromium- rhenium, and derived alloys /

Gilbert, A.
Horonjeff, Robert.
Penzien, Joseph.
Battelle Memorial Institute.
United States. National Aeronautics and Space Administration.

"November 1964"--- cover.Includes bibliographical references (p. 49-51).Prepared by Battelle Memoria...

Ductility mechanisms and superplasticity in chromium alloys /

Stephens, Joseph R.
Klopp, William D.
Lewis Research Center.

Prepared at Lewis Research Center."January 1968"--Cover.Includes bibliographical references (p. 29-3...

Tensile properties of palladium-silver alloys with absorbed hydrogen /

Smith, Robert J.
Otterson, Dumas A.
Lewis Research Center.

January 1975

Prepared at Lewis Research Center.Cover title.Includes bibliographical references (p. 8-9).Mode of a...

Resistance of nickel-chromium-aluminum alloys to cyclic oxidation at 1100 ̊and 1200 ̊C. /

Barrett, Charles A.
Lowell, Carl E., joint author.
United States. National Aeronautics and Space Administration.
Lewis Research Center.

January 1976

Cover title.Includes bibliographical references (p. 16).Mode of access: Internet

Smooth and sharp-notch tensile properties of cold-reduced AISI 301 and 304L stainless-steel sheet at 75 degrees, -320 degrees and -423 degrees F /

Hanson, Morgan P.
United States. National Aeronautics and Space Administration.

Cover title."February 1961."Materials, engineering; Physics, solid state; Stresses and loads; Struct...

Modified ferritic iron alloys with improved high-temperature mechanical properties and oxidation resistance /

Oldrieve, Robert E.
Lewis Research Center.

January 1975

Prepared at Lewis Research Center.Cover title.Includes bibliographical references (p. 13).Mode of ac...

Lubrication of corrosion-resistant alloys by mixtures of halogen-containing gases at temperatures up to 1200 ̊F /

Buckley, Donald H.
Johnson, Robert L. (Robert Lewis), 1929-
Lewis Research Center.

Prepared at Lewis Research Center."November 1959."Cover title.Includes bibliographical references (p...

Thermal-fatigue and oxidation resistance of cobalt-modified Udimet 700 alloy /

Bizon, Peter T.
Barrow, Betty J.
Lewis Research Center.

January 1986

Prepared at Lewis Research Center."April 1986"--Cover.Includes bibliographical references (p. 12).Mo...

High-temperature mechanical properties of a zirconium-modified, precipitation-strengthened nickel-30 percent copper alloy /

Whittenberger, J. Daniel (John Daniel)
Lewis Research Center.

January 1974

Prepared at Lewis Research Center.Cover title.Includes bibliographical references (p. 8-9).Mode of a...

Heat treatment for improved stress-corrosion resistance of 17-7 ph stainless steel /

Johnson, Carl R.
Grimsley, John D.
Goddard Space Flight Center.
United States. National Aeronautics and Space Administration.

January 1968

Cover title."July 1968."Includes bibliographical references (p. 7).Mode of access: Internet

Improved adherence of sputtered titanium carbide coatings on nickel- and titanium-base alloys /

Wheeler, Donald R.
Brainard, William A.
Lewis Research Center.
United States. National Aeronautics and Space Administration. Scientific and Technical Information Office.

January 1979

"April 1979"--Cover."Lewis Research Center."Includes bibliographical references.Mode of access: Inte...

Mechanical properties and resistance to corrosion of rolled light alloys of aluminum and magnesium with copper, with nickel, and with manganese /

Merica, Paul Dyer, 1889-
Finn, Alfred Nelson, 1882- joint author.
Waltenberg, Romaine George, 1889- joint author.
United States. National Bureau of Standards. Technologic Papers.

January 1919

Running title: Properties of light alloys.Includes bibliographical references.Mode of access: Intern...

The relative stress-corrosion cracking susceptibility of candidate aluminum-lithium alloys for aerospace applications /

Pizzo, Patrick P.
United States. National Aeronautics and Space Administration. Scientific and Technical Information Office.
Advanced Research and Applications Corporation.
Ames Research Center.

January 1982

"June 1982"--Cover."Advanced Research and Applications Corporation."Includes bibliographical referen...

High-temperature tensile properties of wrought sintered tungsten /

Sikora, Paul F.
Hall, Robert W., 1937-
Lewis Research Center.

Prepared at Lewis Research Center."September 1959."Cover title.Includes bibliographical references (...

The variation of corrosion potential with time for coated metal surfaces /

Danford, Merlin D.
Knockemus, Ward W.
George C. Marshall Space Flight Center.

January 1986

Prepared at George C. Marshall Space Flight Center."September 1986"--Cover.Includes bibliographical ...

Mechanical properties and oxidation and corrosion resistance of reduced chromium 304 stainless steel alloys /

Abstract

Extracted data

Mechanical properties and oxidation and corrosion resistance of reduced chromium 304 stainless steel alloys /

Abstract

Extracted data

Related items

Related items