Beardslee on wrought-iron and chain-cables. Experiments on the strength of wrought-iron and of chain-cables. Report of the Committees of the United States board appointed to test iron, steel and other metals, on chain-cables, malleable iron, and re-heating and re-rolling wrought-iron; including miscellaneous investigations into the physical and chemical properties of rolled wrought-iron.

Some tests of steel-wire rope on sheaves,

Skillman, Edward, 1885-
United States. National Bureau of Standards. Technologic Papers.

Issued as part of Technologic Papers of the Bureau of Standards, Volume 17, 1922-1924. Prior to Vol....

Iron and steel manufacture. A series of papers on the manufacture and properties of iron and steel: with reports on iron and steel in the Paris exhibition of 1867; reviews of the state and progress of the manufacture during the years 1867 & 1868; and descriptions of many of the principal iron and steel works in Great Britain and on the continent.

Kohn, Ferdinand, 1837-1871.

January 1869

Reprinted from "Engineering," Revised and enlarge by the author.Mode of access: Internet

Pig iron : including the relation between its physical properties and its chemical constituents /

Outerbridge, Alexander Ewing, 1850-1928.
Franklin Institute (Philadelphia, Pa.)

January 1888

Reprinted from the Journal of the Franklin Institute, v. 125, Mar., 1888."Abstract of a lecture deli...

Report of the United States Board appointed to test iron, steel and other metals. In two volumes.

United States. Board for testing iron, steel and other metals.

January 1881

"Memoir on the planing of metals, by Mr. Tresca, translated by C. F. Kroeh": vol. II, p. 617-685.Vol...

The nick-bend test for wrought iron /

Rawdon, Henry S., 1880-
Epstein, Samuel William, 1893- joint author.
United States. National Bureau of Standards. Technologic Papers.

January 252

Issued as part of Technologic Papers of the Bureau of Standards, Volume 18, 1924-1925. Prior to Vol....

Manufacture of iron.

Needham, M.
Society for the Diffusion of Useful Knowledge.

January 1837

"Reprinted from the Library of useful knowledge, published under the direction of the Society for th...

Report on the fabrication of iron for defensive purposes, and its uses in modern fortifications especially in works of coast defense [with Supplement].

Barnard, J. G. (John Gross), 1815-1882.
Michie, Peter Smith, 1839-1901.
Wright, Horatio Gouverneur, 1820-1899.

Supplementary report by John G. Barnard.By John G. Barnard, Horatio G. Wright and Peter S. Michie, o...

Practical essay on the strength of cast iron and other metals; containing practical rules, tables, and examples, founded on a series of experiments; with an extensive table of the properties of materials.

Tredgold, Thomas, 1788-1829.
Hodgkinson, Eaton, 1789-1861.

Paged continuously."Part II" has title: Experimental researches. By Eaton Hodgkinson. London, J. Wea...

Preparation and properties of pure iron alloys.

Rawdon, Henry S.
Sillers, Frederick, Jr.
United States. National Bureau of Standards. Scientific Papers.

Issued as part of Scientific Papers of the Bureau of Standards, Volume 18, 1922-23.Includes bibliogr...

Iron as a material of construction: being the substance of a course of lectures delivered at the Royal school of naval architecture, South Kensington.

Pole, William, 1814-1900.

January 1872

"List of works bearing on the production, nature, and properties of iron": p. iv-v.Mode of access: I...

Experimental researches on the strength and other properties of cast iron: with the development of new principles; calculations deduced from them; and inquiries applicable to rigid and tenacious bodies generally.

Hodgkinson, Eaton, 1789-1861.

January 1846

Appended as the second part to the 4th ed. of Thomas Tredgold's "Practical essay on the strength of ...

American malleable iron, a handbook.

Malleable Founders' Society, Cleveland.

January 1944

"Selected bibliography on the effect of alloys in malleable iron": p. 236-238. "Bibliography of sour...

Malleable iron castings.

Malleable Founders' Society, Cleveland.

January 1960

Published in 1944 under title: American malleable iron, a handbook.Includes bibliography.Mode of acc...

Research work on malleable iron,

Touceda, Enrique.

January 1919

Presented at the spring meeting of the American Society of Mechanical Engineers, Detroit, Mich., Jun...

Electrical resistance and critical ranges of pure iron /

Burgess, G. K. (George Kimball), 1874-1932.
Kellberg, Ira Newton, b. 1894.
United States. National Bureau of Standards.

Running title: Electrical resistance of iron.Also issued as Scientific papers of the Bureau of Stand...

Some tests of steel-wire rope on sheaves,

Skillman, Edward, 1885-
United States. National Bureau of Standards. Technologic Papers.

Issued as part of Technologic Papers of the Bureau of Standards, Volume 17, 1922-1924. Prior to Vol....

Iron and steel manufacture. A series of papers on the manufacture and properties of iron and steel: with reports on iron and steel in the Paris exhibition of 1867; reviews of the state and progress of the manufacture during the years 1867 & 1868; and descriptions of many of the principal iron and steel works in Great Britain and on the continent.

Kohn, Ferdinand, 1837-1871.

January 1869

Reprinted from "Engineering," Revised and enlarge by the author.Mode of access: Internet

Pig iron : including the relation between its physical properties and its chemical constituents /

Outerbridge, Alexander Ewing, 1850-1928.
Franklin Institute (Philadelphia, Pa.)

January 1888

Reprinted from the Journal of the Franklin Institute, v. 125, Mar., 1888."Abstract of a lecture deli...

Report of the United States Board appointed to test iron, steel and other metals. In two volumes.

United States. Board for testing iron, steel and other metals.

January 1881

"Memoir on the planing of metals, by Mr. Tresca, translated by C. F. Kroeh": vol. II, p. 617-685.Vol...

The nick-bend test for wrought iron /

Rawdon, Henry S., 1880-
Epstein, Samuel William, 1893- joint author.
United States. National Bureau of Standards. Technologic Papers.

January 252

Issued as part of Technologic Papers of the Bureau of Standards, Volume 18, 1924-1925. Prior to Vol....

Manufacture of iron.

Needham, M.
Society for the Diffusion of Useful Knowledge.

January 1837

"Reprinted from the Library of useful knowledge, published under the direction of the Society for th...

Report on the fabrication of iron for defensive purposes, and its uses in modern fortifications especially in works of coast defense [with Supplement].

Barnard, J. G. (John Gross), 1815-1882.
Michie, Peter Smith, 1839-1901.
Wright, Horatio Gouverneur, 1820-1899.

Supplementary report by John G. Barnard.By John G. Barnard, Horatio G. Wright and Peter S. Michie, o...

Practical essay on the strength of cast iron and other metals; containing practical rules, tables, and examples, founded on a series of experiments; with an extensive table of the properties of materials.

Tredgold, Thomas, 1788-1829.
Hodgkinson, Eaton, 1789-1861.

Paged continuously."Part II" has title: Experimental researches. By Eaton Hodgkinson. London, J. Wea...

Preparation and properties of pure iron alloys.

Rawdon, Henry S.
Sillers, Frederick, Jr.
United States. National Bureau of Standards. Scientific Papers.

Issued as part of Scientific Papers of the Bureau of Standards, Volume 18, 1922-23.Includes bibliogr...

Iron as a material of construction: being the substance of a course of lectures delivered at the Royal school of naval architecture, South Kensington.

Pole, William, 1814-1900.

January 1872

"List of works bearing on the production, nature, and properties of iron": p. iv-v.Mode of access: I...

Experimental researches on the strength and other properties of cast iron: with the development of new principles; calculations deduced from them; and inquiries applicable to rigid and tenacious bodies generally.

Hodgkinson, Eaton, 1789-1861.

January 1846

Appended as the second part to the 4th ed. of Thomas Tredgold's "Practical essay on the strength of ...

American malleable iron, a handbook.

Malleable Founders' Society, Cleveland.

January 1944

"Selected bibliography on the effect of alloys in malleable iron": p. 236-238. "Bibliography of sour...

Malleable iron castings.

Malleable Founders' Society, Cleveland.

January 1960

Published in 1944 under title: American malleable iron, a handbook.Includes bibliography.Mode of acc...

Research work on malleable iron,

Touceda, Enrique.

January 1919

Presented at the spring meeting of the American Society of Mechanical Engineers, Detroit, Mich., Jun...

Electrical resistance and critical ranges of pure iron /

Burgess, G. K. (George Kimball), 1874-1932.
Kellberg, Ira Newton, b. 1894.
United States. National Bureau of Standards.

Running title: Electrical resistance of iron.Also issued as Scientific papers of the Bureau of Stand...

Some tests of steel-wire rope on sheaves,

Skillman, Edward, 1885-
United States. National Bureau of Standards. Technologic Papers.

Issued as part of Technologic Papers of the Bureau of Standards, Volume 17, 1922-1924. Prior to Vol....

Iron and steel manufacture. A series of papers on the manufacture and properties of iron and steel: with reports on iron and steel in the Paris exhibition of 1867; reviews of the state and progress of the manufacture during the years 1867 & 1868; and descriptions of many of the principal iron and steel works in Great Britain and on the continent.

Kohn, Ferdinand, 1837-1871.

January 1869

Reprinted from "Engineering," Revised and enlarge by the author.Mode of access: Internet

Pig iron : including the relation between its physical properties and its chemical constituents /

Outerbridge, Alexander Ewing, 1850-1928.
Franklin Institute (Philadelphia, Pa.)

January 1888

Reprinted from the Journal of the Franklin Institute, v. 125, Mar., 1888."Abstract of a lecture deli...

Abstract

Extracted data

Abstract

Extracted data

Related items

Related items