A preliminary survey into the sputtering rates for protons bombarding stainless steel in the 30 to 80 kev range was made experimentally. Results show a sputtered atom to incident ion ratio of 0.16 x 10⁻² to 2.0 x 10⁻²."Technical Information Service, Oak Ridge, Tennessee.""August 11, 1953."Includes bibliographical references.A preliminary survey into the sputtering rates for protons bombarding stainless steel in the 30 to 80 kev range was made experimentally. Results show a sputtered atom to incident ion ratio of 0.16 x 10⁻² to 2.0 x 10⁻².Mode of access: Internet
Real time electrochemical data were acquired for tungsten, tantalum, stainless steel 304L, and gold ...
This paper presents our efforts and current progress in evaluating the susceptibility of materials i...
This paper summarizes the ongoing evaluation of the susceptibility of materials in accelerator targe...
Sputtering yields for uranium metal under bombardment by 13 - 120 keV protons and by 20 - 120 keV H...
Under ideal conditions ion plating produces finely grained dense coatings with excellent adhesion. T...
Voids have been produced by 1.2-MeV proton irradiation at 500 degrees C in Type 316 stainless steel ...
A method for measuring the real-time corrosion rates for Alloy 718, stainless steels (SS) 304L and 3...
Abstract: Differential sputter yields are reported for Molybdenum, Tantalum, and Tungsten after expo...
International audienceAn innovative experimental equipment allowing to study the sputtering induced ...
Les expériences de sputtering ont été faites avec KCl et KI, à l'aide des ions H+, He+ et Ar+. Les é...
This paper presents a summary of our current efforts to measure the real-time corrosion rates of All...
A quantitative method is described for measuring the sputtered depth profile of an ion beam and calc...
"Knolls Atomic Power Laboratory, Schenectady, New York, operated for the U.S. Atomic Energy Commissi...
AbstractSputtering of the pure materials iron (Fe), chromium (Cr) and tungsten (W) due to energetic ...
Due to the character of the original source materials and the nature of batch digitization, quality ...
Real time electrochemical data were acquired for tungsten, tantalum, stainless steel 304L, and gold ...
This paper presents our efforts and current progress in evaluating the susceptibility of materials i...
This paper summarizes the ongoing evaluation of the susceptibility of materials in accelerator targe...
Sputtering yields for uranium metal under bombardment by 13 - 120 keV protons and by 20 - 120 keV H...
Under ideal conditions ion plating produces finely grained dense coatings with excellent adhesion. T...
Voids have been produced by 1.2-MeV proton irradiation at 500 degrees C in Type 316 stainless steel ...
A method for measuring the real-time corrosion rates for Alloy 718, stainless steels (SS) 304L and 3...
Abstract: Differential sputter yields are reported for Molybdenum, Tantalum, and Tungsten after expo...
International audienceAn innovative experimental equipment allowing to study the sputtering induced ...
Les expériences de sputtering ont été faites avec KCl et KI, à l'aide des ions H+, He+ et Ar+. Les é...
This paper presents a summary of our current efforts to measure the real-time corrosion rates of All...
A quantitative method is described for measuring the sputtered depth profile of an ion beam and calc...
"Knolls Atomic Power Laboratory, Schenectady, New York, operated for the U.S. Atomic Energy Commissi...
AbstractSputtering of the pure materials iron (Fe), chromium (Cr) and tungsten (W) due to energetic ...
Due to the character of the original source materials and the nature of batch digitization, quality ...
Real time electrochemical data were acquired for tungsten, tantalum, stainless steel 304L, and gold ...
This paper presents our efforts and current progress in evaluating the susceptibility of materials i...
This paper summarizes the ongoing evaluation of the susceptibility of materials in accelerator targe...