The stress corrosion susceptibility of several alloys in hydrazine fuels /

An evaluation of three oxidation-resistant alloy claddings for IN 100 and WI 52 superalloys /

Gedwill, Michael A.
United States. National Aeronautics and Space Administration.
Lewis Research Center.

Three oxidation-resistant alloy foil claddings for protecting typical gas turbine engine alloys of n...

Evaluation of alloys and coatings for use in automobile thermal reactors /

Blankenship, Charles P.
Oldrieve, Robert E.
Lewis Research Center.

January 1974

Prepared at Lewis Research Center.Cover title.Includes bibliographical references (p. 20-21).Mode of...

Thermochemistry of binary alloys and its effect upon friction and wear /

Buckley, Donald H.
Lewis Research Center.

January 1971

Prepared at Lewis Research Center.Cover title.Bibliography: p. 7-8.Mode of access: Internet

Stress-corrosion cracking of aluminum alloys /

Jackson, J. D. author.
Boyd, Walter K., author.
Defense Metals Information Center (U.S.) issuing body.

Research supported by the Technology Division, Wright-Patterson Air Force Base, Ohio.Cover title."Fe...

The relative stress-corrosion cracking susceptibility of candidate aluminum-lithium alloys for aerospace applications /

Pizzo, Patrick P.
United States. National Aeronautics and Space Administration. Scientific and Technical Information Office.
Advanced Research and Applications Corporation.
Ames Research Center.

January 1982

"June 1982"--Cover."Advanced Research and Applications Corporation."Includes bibliographical referen...

Hot-salt stress-corrosion of a titanium alloy under a simulated turbine-engine compressor environment /

Gray, Hugh R.
Johnston, James R.
Lewis Research Center.

Prepared at Lewis Research Center."October 1969"--Cover.Includes bibliographical references (p. 24-2...

Some factors affecting the stress-corrosion cracking of Ti-6Al-4V alloy in methanol /

Lisagor, W. Barry.
United States. National Aeronautics and Space Administration.
Langley Research Center.

Factors affecting stress-corrosion cracking of Ti-6Al-4V alloy in methanol.Prepared at Langley Resea...

Corrosion, causes and prevention; an engineering problem,

Speller, Frank Newman, 1875-

"Selected bibliography on the corrosion of ferrous metals": p. 564-577.Mode of access: Internet

Stress-corrosion cracking of high-strength stainless steels in atmospheric environments /

Slunder, C. J., author.
Defense Metals Information Center (U.S.) issuing body.

Research supported by the Technology Division, Wright-Patterson Air Force Base, Ohio."September 15, ...

Salt stress corrosion of residually stressed Ti-8Al-1Mo-1V alloy sheet after exposure at elevated temperatures /

Dexter, Howard B. (Howard Benson), 1941-
Langley Research Center.

Prepared at Langley Research Center."March 1966"--Cover.Includes bibliographical references (p. 20)....

Hydrogen environment embrittlement of metals /

Jewett, Robert Paul, 1932-
North American Rockwell Corporation. Rocketdyne Division.

January 1973

Cover title.Includes bibliographical references (p. 211-218).Mode of access: Internet

Effect of exposure cycle on hot-salt stress-corrosion of a titanium alloy /

Gray, Hugh R.
Johnston, James R.
Lewis Research Center.

January 1974

Prepared at Lewis Research Center.Cover title.Includes bibliographical references (p. 13-14).Mode of...

The influence of gaseous environment on the self-adhesion of metals /

Gilbreath, William.
Ames Research Center.

January 1968

Prepared at Ames Research Center.Includes bibliographical references (p. 18-20).Mode of access: Inte...

Process industries handbook of corrosion resistant materials.

Chemical Engineering.
Kirkpatrick, Sidney D. (Sidney Dale), 1894-1973.

Reprint of the survey made not long ago, much supplemented and brought up to date with additional ar...

Resistance of nickel-chromium-aluminum alloys to cyclic oxidation at 1100 ̊and 1200 ̊C. /

Barrett, Charles A.
Lowell, Carl E., joint author.
United States. National Aeronautics and Space Administration.
Lewis Research Center.

January 1976

Cover title.Includes bibliographical references (p. 16).Mode of access: Internet

An evaluation of three oxidation-resistant alloy claddings for IN 100 and WI 52 superalloys /

Gedwill, Michael A.
United States. National Aeronautics and Space Administration.
Lewis Research Center.

Three oxidation-resistant alloy foil claddings for protecting typical gas turbine engine alloys of n...

Evaluation of alloys and coatings for use in automobile thermal reactors /

Blankenship, Charles P.
Oldrieve, Robert E.
Lewis Research Center.

January 1974

Prepared at Lewis Research Center.Cover title.Includes bibliographical references (p. 20-21).Mode of...

Thermochemistry of binary alloys and its effect upon friction and wear /

Buckley, Donald H.
Lewis Research Center.

January 1971

Prepared at Lewis Research Center.Cover title.Bibliography: p. 7-8.Mode of access: Internet

Stress-corrosion cracking of aluminum alloys /

Jackson, J. D. author.
Boyd, Walter K., author.
Defense Metals Information Center (U.S.) issuing body.

Research supported by the Technology Division, Wright-Patterson Air Force Base, Ohio.Cover title."Fe...

The relative stress-corrosion cracking susceptibility of candidate aluminum-lithium alloys for aerospace applications /

Pizzo, Patrick P.
United States. National Aeronautics and Space Administration. Scientific and Technical Information Office.
Advanced Research and Applications Corporation.
Ames Research Center.

January 1982

"June 1982"--Cover."Advanced Research and Applications Corporation."Includes bibliographical referen...

Hot-salt stress-corrosion of a titanium alloy under a simulated turbine-engine compressor environment /

Gray, Hugh R.
Johnston, James R.
Lewis Research Center.

Prepared at Lewis Research Center."October 1969"--Cover.Includes bibliographical references (p. 24-2...

Some factors affecting the stress-corrosion cracking of Ti-6Al-4V alloy in methanol /

Lisagor, W. Barry.
United States. National Aeronautics and Space Administration.
Langley Research Center.

Factors affecting stress-corrosion cracking of Ti-6Al-4V alloy in methanol.Prepared at Langley Resea...

Corrosion, causes and prevention; an engineering problem,

Speller, Frank Newman, 1875-

"Selected bibliography on the corrosion of ferrous metals": p. 564-577.Mode of access: Internet

Stress-corrosion cracking of high-strength stainless steels in atmospheric environments /

Slunder, C. J., author.
Defense Metals Information Center (U.S.) issuing body.

Research supported by the Technology Division, Wright-Patterson Air Force Base, Ohio."September 15, ...

Salt stress corrosion of residually stressed Ti-8Al-1Mo-1V alloy sheet after exposure at elevated temperatures /

Dexter, Howard B. (Howard Benson), 1941-
Langley Research Center.

Prepared at Langley Research Center."March 1966"--Cover.Includes bibliographical references (p. 20)....

Hydrogen environment embrittlement of metals /

Jewett, Robert Paul, 1932-
North American Rockwell Corporation. Rocketdyne Division.

January 1973

Cover title.Includes bibliographical references (p. 211-218).Mode of access: Internet

Effect of exposure cycle on hot-salt stress-corrosion of a titanium alloy /

Gray, Hugh R.
Johnston, James R.
Lewis Research Center.

January 1974

Prepared at Lewis Research Center.Cover title.Includes bibliographical references (p. 13-14).Mode of...

The influence of gaseous environment on the self-adhesion of metals /

Gilbreath, William.
Ames Research Center.

January 1968

Prepared at Ames Research Center.Includes bibliographical references (p. 18-20).Mode of access: Inte...

Process industries handbook of corrosion resistant materials.

Chemical Engineering.
Kirkpatrick, Sidney D. (Sidney Dale), 1894-1973.

Reprint of the survey made not long ago, much supplemented and brought up to date with additional ar...

Resistance of nickel-chromium-aluminum alloys to cyclic oxidation at 1100 ̊and 1200 ̊C. /

Barrett, Charles A.
Lowell, Carl E., joint author.
United States. National Aeronautics and Space Administration.
Lewis Research Center.

January 1976

Cover title.Includes bibliographical references (p. 16).Mode of access: Internet

An evaluation of three oxidation-resistant alloy claddings for IN 100 and WI 52 superalloys /

Gedwill, Michael A.
United States. National Aeronautics and Space Administration.
Lewis Research Center.

Three oxidation-resistant alloy foil claddings for protecting typical gas turbine engine alloys of n...

Evaluation of alloys and coatings for use in automobile thermal reactors /

Blankenship, Charles P.
Oldrieve, Robert E.
Lewis Research Center.

January 1974

Prepared at Lewis Research Center.Cover title.Includes bibliographical references (p. 20-21).Mode of...

Thermochemistry of binary alloys and its effect upon friction and wear /

Buckley, Donald H.
Lewis Research Center.

January 1971

Prepared at Lewis Research Center.Cover title.Bibliography: p. 7-8.Mode of access: Internet

The stress corrosion susceptibility of several alloys in hydrazine fuels /

Abstract

Extracted data

The stress corrosion susceptibility of several alloys in hydrazine fuels /

Abstract

Extracted data

Related items

Related items