Crack-growth behavior in thick welded plates of Inconel 718 at room and cryogenic temperatures /

Stress-corrosion cracking of high-strength stainless steels in atmospheric environments /

Slunder, C. J., author.
Defense Metals Information Center (U.S.) issuing body.

Research supported by the Technology Division, Wright-Patterson Air Force Base, Ohio."September 15, ...

Crack-closure and crack-growth measurements in surface-flawed titanium alloy Ti-6Al-4V /

Wolf, Elber.
Langley Research Center.

January 1975

Prepared at Langley Research Center.Cover title.Includes bibliographical references (p. 7).Mode of a...

A three-dimensional analysis of the effects of heat generation in plates /

McWithey, Robert R.
Langley Research Center.

Prepared at Langley Research Center."January 1968"--Cover.Includes bibliographical references (p. 26...

Flaw growth behavior in thick welded plates of 2219-T87 aluminum at room and cryogenic temperatures [electronic resource] /

Forman, Royce G.
Medlock, James D.
Glorioso, Samuel V.
United States. National Aeronautics and Space Administration.
Lyndon B. Johnson Space Center.

January 1973

Axial load fatigue and fracture tests were conducted on thick welded plates of 2219-T87 aluminum all...

Fracture testing of weldments /

Kies, J. A.
Naval Research Laboratory (U.S.)
United States. National Aeronautics and Space Administration.

"December 1964"--- cover.Includes bibliographical references.Includes bibliographical references (p....

Crack-growth behavior in thick welded plates of Inconel 718 at room and cryogenic temperatures

Forman, R. G.

May 1974

Results of mechanical-properties and axial-load fatigue and fracture tests performed on thick welded...

Texture strengthening and fracture toughness of titanium alloy sheet at room and cryogenic temperatures /

Sullivan, Timothy L.
Lewis Research Center.
United States. National Aeronautics and Space Administration.

January 1968

Cover title."May 1968."Includes bibliographical references (p. 22-23).Mode of access: Internet

Effect of specimen thickness on fatigue-crack-growth behavior and fracture toughness of 7075-T6 and 7178-T6 aluminum alloys /

Hudson, Charles Michael, 1935-
Newman, J. C.
Langley Research Center.

January 1973

Prepared at Langley Research Center.Cover title.Bibliography: p. 12-13.Mode of access: Internet

An investigation of fracture toughness, fatigue-crack growth, sustained-load flaw growth, and impact properties of three pressure vessel steels /

Hudson, Charles Michael, 1935-
Lewis, Peter E.
Newman, J. C.
Langley Research Center.

January 1975

Prepared at Langley Research Center.Cover title.Includes bibliographical references (p. 18-19).Mode ...

Fracture toughness and crack growth of Zerodur /

Viens, Michael J., 1957-
Goddard Space Flight Center.

January 1990

Prepared at Goddard Space Flight Center.Bibliography: p. 17-18.Mode of access: Internet

Surface recession characteristics of a cryogenic insulation subjected to arc-tunnel heating /

Pittman, C. M. (Claud M.)
Brown, Ronald D.
Langley Research Center.

January 1975

Prepared at Langley Research Center.Cover title.Includes bibliographical references (p. 10).Mode of ...

Fatigue crack growth of A508 steel in high-temperature, pressurized reactor grade water /

Cullen, W. H. author.
Loss, F. L. author.
Watson, H. E. author.
Torronen, K. J. author.
Provenzano, V. author.
U.S. Nuclear Regulatory Commission.
Naval Research Laboratory (U.S.). Thermostructural Materials Branch.

"NUREG/CR 0969.""September 28, 1979.""Thermostructural Materials Branch, Material Science and Techno...

Tensile properties and sheet-bending fatigue properties of some refractory metals at room temperature

Foster, Lee R.
Stein, Bland A.
United States. National Aeronautics and Space Administration.

Cover title."January 1963."Includes bibliographical references.Mode of access: Internet

Compressive and tensile creep of 7075-T6 and 2024-T3 aluminum-alloy sheet /

Heimerl, George J.
Farquhar, John, 1932-
Langley Research Center.

Prepared at Langley Research Center."December 1959."Cover title.Includes bibliographical references ...

Fatigue-crack initiation and growth in notched 2024-T 3 specimens monitored by a video tape system /

Sova, J. A.
Exton, R. J., joint author.
Crews, John H., joint author.
United States. National Aeronautics and Space Administration.
Langley Research Center.

January 1976

Cover title.Includes bibliographical references (p. 16-17).Mode of access: Internet

Stress-corrosion cracking of high-strength stainless steels in atmospheric environments /

Slunder, C. J., author.
Defense Metals Information Center (U.S.) issuing body.

Research supported by the Technology Division, Wright-Patterson Air Force Base, Ohio."September 15, ...

Crack-closure and crack-growth measurements in surface-flawed titanium alloy Ti-6Al-4V /

Wolf, Elber.
Langley Research Center.

January 1975

Prepared at Langley Research Center.Cover title.Includes bibliographical references (p. 7).Mode of a...

A three-dimensional analysis of the effects of heat generation in plates /

McWithey, Robert R.
Langley Research Center.

Prepared at Langley Research Center."January 1968"--Cover.Includes bibliographical references (p. 26...

Flaw growth behavior in thick welded plates of 2219-T87 aluminum at room and cryogenic temperatures [electronic resource] /

Forman, Royce G.
Medlock, James D.
Glorioso, Samuel V.
United States. National Aeronautics and Space Administration.
Lyndon B. Johnson Space Center.

January 1973

Axial load fatigue and fracture tests were conducted on thick welded plates of 2219-T87 aluminum all...

Fracture testing of weldments /

Kies, J. A.
Naval Research Laboratory (U.S.)
United States. National Aeronautics and Space Administration.

"December 1964"--- cover.Includes bibliographical references.Includes bibliographical references (p....

Crack-growth behavior in thick welded plates of Inconel 718 at room and cryogenic temperatures

Forman, R. G.

May 1974

Results of mechanical-properties and axial-load fatigue and fracture tests performed on thick welded...

Texture strengthening and fracture toughness of titanium alloy sheet at room and cryogenic temperatures /

Sullivan, Timothy L.
Lewis Research Center.
United States. National Aeronautics and Space Administration.

January 1968

Cover title."May 1968."Includes bibliographical references (p. 22-23).Mode of access: Internet

Effect of specimen thickness on fatigue-crack-growth behavior and fracture toughness of 7075-T6 and 7178-T6 aluminum alloys /

Hudson, Charles Michael, 1935-
Newman, J. C.
Langley Research Center.

January 1973

Prepared at Langley Research Center.Cover title.Bibliography: p. 12-13.Mode of access: Internet

An investigation of fracture toughness, fatigue-crack growth, sustained-load flaw growth, and impact properties of three pressure vessel steels /

Hudson, Charles Michael, 1935-
Lewis, Peter E.
Newman, J. C.
Langley Research Center.

January 1975

Prepared at Langley Research Center.Cover title.Includes bibliographical references (p. 18-19).Mode ...

Fracture toughness and crack growth of Zerodur /

Viens, Michael J., 1957-
Goddard Space Flight Center.

January 1990

Prepared at Goddard Space Flight Center.Bibliography: p. 17-18.Mode of access: Internet

Surface recession characteristics of a cryogenic insulation subjected to arc-tunnel heating /

Pittman, C. M. (Claud M.)
Brown, Ronald D.
Langley Research Center.

January 1975

Prepared at Langley Research Center.Cover title.Includes bibliographical references (p. 10).Mode of ...

Fatigue crack growth of A508 steel in high-temperature, pressurized reactor grade water /

Cullen, W. H. author.
Loss, F. L. author.
Watson, H. E. author.
Torronen, K. J. author.
Provenzano, V. author.
U.S. Nuclear Regulatory Commission.
Naval Research Laboratory (U.S.). Thermostructural Materials Branch.

"NUREG/CR 0969.""September 28, 1979.""Thermostructural Materials Branch, Material Science and Techno...

Tensile properties and sheet-bending fatigue properties of some refractory metals at room temperature

Foster, Lee R.
Stein, Bland A.
United States. National Aeronautics and Space Administration.

Cover title."January 1963."Includes bibliographical references.Mode of access: Internet

Compressive and tensile creep of 7075-T6 and 2024-T3 aluminum-alloy sheet /

Heimerl, George J.
Farquhar, John, 1932-
Langley Research Center.

Prepared at Langley Research Center."December 1959."Cover title.Includes bibliographical references ...

Fatigue-crack initiation and growth in notched 2024-T 3 specimens monitored by a video tape system /

Sova, J. A.
Exton, R. J., joint author.
Crews, John H., joint author.
United States. National Aeronautics and Space Administration.
Langley Research Center.

January 1976

Cover title.Includes bibliographical references (p. 16-17).Mode of access: Internet

Stress-corrosion cracking of high-strength stainless steels in atmospheric environments /

Slunder, C. J., author.
Defense Metals Information Center (U.S.) issuing body.

Research supported by the Technology Division, Wright-Patterson Air Force Base, Ohio."September 15, ...

Crack-closure and crack-growth measurements in surface-flawed titanium alloy Ti-6Al-4V /

Wolf, Elber.
Langley Research Center.

January 1975

Prepared at Langley Research Center.Cover title.Includes bibliographical references (p. 7).Mode of a...

A three-dimensional analysis of the effects of heat generation in plates /

McWithey, Robert R.
Langley Research Center.

Prepared at Langley Research Center."January 1968"--Cover.Includes bibliographical references (p. 26...

Crack-growth behavior in thick welded plates of Inconel 718 at room and cryogenic temperatures /

Abstract

Extracted data

Crack-growth behavior in thick welded plates of Inconel 718 at room and cryogenic temperatures /

Abstract

Extracted data

Topics

Related items

Topics

Related items