Blast retrofit design of CMU walls using polymer sheets

The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file.Title from title screen of research.pdf file (viewed on April 17, 2009)Includes bibliographical references.Thesis (M.S.) University of Missouri-Columbia 2006.Dissertations, Academic -- University of Missouri--Columbia -- Civil engineering.Many materials have been tested for blast retrofit design but have shown to have limitation. The focus of this research is the analysis of polymer sheets as a method for retrofit design. There are many advantages of polymer sheets, such as the sheets are very thin and take up very little space, polymer have large amount of energy absorption capabilities, and the installation process is quick and easy to perform in the field. This research is done to ascertain the strength, ductility, response to static pressure, investigate connection details, and develop an analytical model of the static resistance function. The polymer retrofit system is modeled dynamically in a single degree of freedom (SDOF) model. The analytical model developed for the static resistance is used in the SDOF model. Additionally, three types of test were conducted at the coupon, connection, and component levels to verify the analytical model. Once the analytical model is verified, it is incorporated into the SDOF model. Additionally, field testing was conducted on three polymers and results were compared to the predicted results. This thesis presents the analytical modeling and experimental evaluation of CMU-polymer walls to blast loading