[[abstract]]The effect of crystallization on the stress required for complete constrained sintering of a low-temperature cofirable CaO-B2O3-SiO2 glass-ceramics has been investigated under uniaxial constant and cyclic loading. As the formation of crystalline phase of wollastonite (CaSiO3) increases, the uniaxial viscosity of the porous glass-ceramics during firing increases. Moreover, the required uniaxial stress to have complete constrained sintering, i.e., zero strain or strain rate at the perpendicular directions, is in the range of 80-180 kPa, which shows no significant dependence on heating rate and firing temperature. The measured data of required stress are close to those calculated using the viscous analogy for the constitutive relat...
The ceramic industry has been concentrating on the reduction of energy usage during manufacturing be...
Porous silicon carbide ceramics were fabricated by liquid phase sintering with 1 wt% Al2O3–1 wt% Y2O...
A glass in the SiO2–Al2O3–MgO–Na2O system was formulated using a non-conventional silica source and ...
[[abstract]]The crystallization kinetics and mechanism of low-dielectric, low-temperature, cofirable...
In this work several complementary techniques have been employedto carefully characterize the sinter...
In this work, powders of the composition (CaO 46- SiO2 34- P2O5 14.5- MgO 4- CaF2 1- MgF2 0.5) (wt. ...
The impact of different sintering temperatures on physical, optical and structural properties of wol...
This work investigates the role of sintering temperature on bioactive glass-ceramics derived from th...
The crystallization of minory amorphous constituens in liquid phase sintered ceramics, for example i...
This paper reports on the experimental determination of the uniaxial viscosity of two commercially a...
A glass in the SiO2–Al2O3–MgO–Na2O system was formulated using a non-conventional silica source and ...
The sintering of spherical borosilicate glass powder (particle size 5 to 10 μm) under a uniaxial str...
The present work deals with a continuum mechanical description of sintering of glass ceramic materia...
[EN] The sintering, crystallization and mechanical behavior of three glass compositions in the SiO-A...
Glass–ceramics for sealing solid oxide fuel cells (SOFCs) were developed by sintering and crystalliz...
The ceramic industry has been concentrating on the reduction of energy usage during manufacturing be...
Porous silicon carbide ceramics were fabricated by liquid phase sintering with 1 wt% Al2O3–1 wt% Y2O...
A glass in the SiO2–Al2O3–MgO–Na2O system was formulated using a non-conventional silica source and ...
[[abstract]]The crystallization kinetics and mechanism of low-dielectric, low-temperature, cofirable...
In this work several complementary techniques have been employedto carefully characterize the sinter...
In this work, powders of the composition (CaO 46- SiO2 34- P2O5 14.5- MgO 4- CaF2 1- MgF2 0.5) (wt. ...
The impact of different sintering temperatures on physical, optical and structural properties of wol...
This work investigates the role of sintering temperature on bioactive glass-ceramics derived from th...
The crystallization of minory amorphous constituens in liquid phase sintered ceramics, for example i...
This paper reports on the experimental determination of the uniaxial viscosity of two commercially a...
A glass in the SiO2–Al2O3–MgO–Na2O system was formulated using a non-conventional silica source and ...
The sintering of spherical borosilicate glass powder (particle size 5 to 10 μm) under a uniaxial str...
The present work deals with a continuum mechanical description of sintering of glass ceramic materia...
[EN] The sintering, crystallization and mechanical behavior of three glass compositions in the SiO-A...
Glass–ceramics for sealing solid oxide fuel cells (SOFCs) were developed by sintering and crystalliz...
The ceramic industry has been concentrating on the reduction of energy usage during manufacturing be...
Porous silicon carbide ceramics were fabricated by liquid phase sintering with 1 wt% Al2O3–1 wt% Y2O...
A glass in the SiO2–Al2O3–MgO–Na2O system was formulated using a non-conventional silica source and ...