Preparation and properties of a carbon nanotube-based nanocomposite photoanode for dye-sensitized solar cells

[[abstract]]This study fabricates dye-sensitized solar cells (DSSCs) based on TiO2/multi-walled carbon nanotube (MWCNT) nanocomposite photoanodes obtained by the modified acid-catalyzed sol-gel procedure. Results show that incorporating MWCNTs into a TiO2-based electrode efficiently improves the physicochemical properties of the solar cell. The results of dye adsorption and cell performance measurements indicate that introducing MWCNTs would improve the roughness factor (from 834 to 1267) of the electrode and the charge recombination of electron/hole (e(-)/h(+)) pairs. These significant changes could lead to higher adsorbed dye quantities, photocurrent and DSSC cell performance. Nevertheless, a higher loading of MWCNTs causes light-harvesting competition that affects the light adsorption of the dye-sensitizer, and consequently reduces the cell efficiency. This study suggests an optimum MWCNT loading in the electrode of 0.3 wt%, and proposes a sol-gel synthesis procedure as a promising method of preparing the TiO2-based nanocomposite.[[fileno]]2060126010046[[department]]工程與系統科學