[[abstract]]©2002 Elsevier - Dependence of physicochemical properties, including crystalline information, morphology, microhardness, paramagnetism, roughness factor and hydrogen evolution ability, for Ni-P deposits on the phosphorus content, varying from 0 to 28 at.%, were systematically examined in this work. In general, the microhardness was gradually increased with the P content but an obvious decrease was observed when the Ni-P deposit contained sulfur (S). Nickel-phosphorus deposits with the P content above 12 at.% showed an amorphous structure while the deposits containing 4-12 at.% of P exhibited a poor crystalline structure. Morphologies of these deposits were found to be a function of the P content. The ferromagnetism of Ni was gra...
This paper deals with the study of the crystallization and phase transformation of Ni-P coatings dep...
The results of modeling a composite nickel-phosphorus coating obtained by chemical deposition are pr...
A previous way of electrodepositing Ni-P alloy containing about 6-8 at.% phosphorus, which has a hig...
[[abstract]]©2002 Elsevier - Dependence of physicochemical properties, including crystalline informa...
[[abstract]]©2003 Elsevier - The dependence of physicochemical properties, including microhardness, ...
In this study electroless Ni-P coatings were deposited on W302 steel substrates. The effects of bath...
Our objectives in this work are to present the important decrease in resistivity which takes place d...
The influence of phosphorus incorporation during electrodeposition of thin (10 to 60 μm thick) nicke...
Chemical deposits of phosphorus nickel (2 to 12 % P) are stabilised by annealing. The phosphorus sho...
Electroless Ni-P coatings were obtained on steel substrates using different bath compositions, which...
[[abstract]]©2003 Elsevier - The corrosion behavior of Ni-P deposits with the phosphorous contents o...
The present study concern the effect of the elaboration parameters on the structural state of the de...
Ni[sbnd]P coatings are extensively employed in engineering, owing to their mechanical and tribologic...
The effect of ammonium acetate on the formation and characteristics of Ni–P electroless deposition o...
In this study electroless Ni-P coatings were deposited on W302 steel substrates. The effects of bath...
This paper deals with the study of the crystallization and phase transformation of Ni-P coatings dep...
The results of modeling a composite nickel-phosphorus coating obtained by chemical deposition are pr...
A previous way of electrodepositing Ni-P alloy containing about 6-8 at.% phosphorus, which has a hig...
[[abstract]]©2002 Elsevier - Dependence of physicochemical properties, including crystalline informa...
[[abstract]]©2003 Elsevier - The dependence of physicochemical properties, including microhardness, ...
In this study electroless Ni-P coatings were deposited on W302 steel substrates. The effects of bath...
Our objectives in this work are to present the important decrease in resistivity which takes place d...
The influence of phosphorus incorporation during electrodeposition of thin (10 to 60 μm thick) nicke...
Chemical deposits of phosphorus nickel (2 to 12 % P) are stabilised by annealing. The phosphorus sho...
Electroless Ni-P coatings were obtained on steel substrates using different bath compositions, which...
[[abstract]]©2003 Elsevier - The corrosion behavior of Ni-P deposits with the phosphorous contents o...
The present study concern the effect of the elaboration parameters on the structural state of the de...
Ni[sbnd]P coatings are extensively employed in engineering, owing to their mechanical and tribologic...
The effect of ammonium acetate on the formation and characteristics of Ni–P electroless deposition o...
In this study electroless Ni-P coatings were deposited on W302 steel substrates. The effects of bath...
This paper deals with the study of the crystallization and phase transformation of Ni-P coatings dep...
The results of modeling a composite nickel-phosphorus coating obtained by chemical deposition are pr...
A previous way of electrodepositing Ni-P alloy containing about 6-8 at.% phosphorus, which has a hig...