[[abstract]]c2004 Elsevier - The etching rates on the Si-(100) and Si-(110) planes at various temperatures and concentrations of a KOH/alcoholic moderator (glycerol, ethylene glycerol, 1,2-propanediol, 1,3-propanediol, isopropanol (IPA), or 1,5-pentanediol) were measured. In addition, the sequential development of holes through a circle mask of the Si (100) with various etchants and times was observed by using scanning electronic microscopy (SEM). The effect of the added alcoholic moderators to the KOH solution was more pronounced on the etching of the Si (110) plane, especially with the addition of IPA and 1,5-pentanediol. The addition of 1,5-pentanediol to the KOH solution resulted in an improvement in the etching anisotropy as well as in...
In this research, a series of comparative etching experiments on silicon wafers have been carried ou...
Anisotropic wet bulk micromachining is a dominant technique used in microelectromechanical systems (...
Abstract Anisotropic wet etching is a most widely employed for the fabrication of MEMS/NEMS structur...
AbstractEtching rates and morphologies of Si wafers with different crystallographic orientations etc...
The success of silicon IC technology in producing a wide variety of microstructures relies heavily o...
In this paper, Isopropanol (IPA) availability during the anisotropic etching of silicon in Potassium...
[[abstract]]Three ion-typed surfactants, including anionic sodium dihexyl sulfosuccinate (SDSS), cat...
Recently the effect of hydroxylamine (NH2OH) on the etching characteristics of alkaline solution (e....
Potassium hydroxide (KOH) provides high anisotropy between the Si{111} and Si{100} planes in compari...
The development of silicon devices, circuits, and systems in most cases relies on the wet-chemical e...
Potassium hydroxide (KOH) and tetramethylammonium hydroxide (TMAH) are most extensively used etchant...
In this paper, the effect of low concentrated alkaline solutions etching on texturized silicon struc...
Wet etching of Si{100} in an alkaline solution result in pyramidal structures, mostly bounded by fou...
Anisotropic wet etching is a most widely employed for the fabrication of MEMS/NEMS structures using ...
A multifactor experimental investigation of silicon surface texturing was conducted in Sandia's...
In this research, a series of comparative etching experiments on silicon wafers have been carried ou...
Anisotropic wet bulk micromachining is a dominant technique used in microelectromechanical systems (...
Abstract Anisotropic wet etching is a most widely employed for the fabrication of MEMS/NEMS structur...
AbstractEtching rates and morphologies of Si wafers with different crystallographic orientations etc...
The success of silicon IC technology in producing a wide variety of microstructures relies heavily o...
In this paper, Isopropanol (IPA) availability during the anisotropic etching of silicon in Potassium...
[[abstract]]Three ion-typed surfactants, including anionic sodium dihexyl sulfosuccinate (SDSS), cat...
Recently the effect of hydroxylamine (NH2OH) on the etching characteristics of alkaline solution (e....
Potassium hydroxide (KOH) provides high anisotropy between the Si{111} and Si{100} planes in compari...
The development of silicon devices, circuits, and systems in most cases relies on the wet-chemical e...
Potassium hydroxide (KOH) and tetramethylammonium hydroxide (TMAH) are most extensively used etchant...
In this paper, the effect of low concentrated alkaline solutions etching on texturized silicon struc...
Wet etching of Si{100} in an alkaline solution result in pyramidal structures, mostly bounded by fou...
Anisotropic wet etching is a most widely employed for the fabrication of MEMS/NEMS structures using ...
A multifactor experimental investigation of silicon surface texturing was conducted in Sandia's...
In this research, a series of comparative etching experiments on silicon wafers have been carried ou...
Anisotropic wet bulk micromachining is a dominant technique used in microelectromechanical systems (...
Abstract Anisotropic wet etching is a most widely employed for the fabrication of MEMS/NEMS structur...