Insulator interface effects in sputter‐deposited NbN/MgO/NbN (superconductor–insulator–superconductor) tunnel junctions

All refractory, NbN/MgO/NbN (superconductor–insulator–superconductor) tunnel junctions have been fabricated by in situ sputter deposition. The influence of MgO thickness (0.8–6.0 nm) deposited under different sputtering ambients at various deposition rates on current–voltage (I–V) characteristics of small‐area (30×30 μm) tunnel junctions is studied. The NbN/MgO/NbN trilayer is deposited in situ by dc reactive magnetron (NbN), and rf magnetron (MgO) sputtering, followed by thermal evaporation of a protective Au cap. Subsequent photolithography, reactive ion etching, planarization, and top contact (Pb/Ag) deposition completes the junction structure. Normal resistance of the junctions with MgO deposited in Ar or Ar and N2 mixture shows good exponential dependence on the MgO thickness indicating formation of a pin‐hole‐free uniform barrier layer. Further, a postdeposition in situ oxygen plasma treatment of the MgO layer increases the junction resistance sharply, and reduces the subgap leakage. A possible enrichment of the MgO layer stoichiometry by the oxygen plasma treatment is suggested. A sumgap as high as 5.7 mV is observed for such a junctio