Add to ORKGThis paper describes experiments with wall-mounted air terminal devices. The stratified flow in the room is analyzed, and the influence of stratification and the influence of room dimensions on the velocity level and on the length scale are proved. The velocity level in the occupied zone can be described by a single equation based partly on stratified flow theory and partly on measurements
The airflow in front of an inlet device in a room with displacement ventilation is investigated in t...
The research on air distribution in rooms is often done as full-size investigations, scale-model inv...
The paper describes measuring results of the air movement from three different types of diffusers fo...
The paper describes experiments with wall-mounted air terminal devices. The airflow from an air term...
Measurements are performed in a full-scale test room with displacement ventilation with focus on the...
Two-dimensional, isothermal full-scale experiments and CFD (Computational Fluid Dynamics) simulation...
The main objective of ventilation is to provide good air quality for the occupants. For this purpose...
An optimal design of the ventilation system needs a proper prediction of the velocity, temperature a...
Ventilation systems with vertical displacement flow have been used in industrial areas with high the...
The design of a displacement ventilation system involves determination of the flow rate in the therm...
Ceiling-mounted slot diffusers in ventilated rooms will often generate a flow of the wall jet type. ...
The room ventilation is investigated for three different air terminal devices under isothermal condi...
The air supply openings in ventilated rooms are often placed close to the ceiling. A recirculating f...
In ventilated rooms the air inlet device is often placed close to the ceiling. The air inlet will fo...
The paper shows a description of the flow from a low level diffuser which is suitable for a design p...
The airflow in front of an inlet device in a room with displacement ventilation is investigated in t...
The research on air distribution in rooms is often done as full-size investigations, scale-model inv...
The paper describes measuring results of the air movement from three different types of diffusers fo...
The paper describes experiments with wall-mounted air terminal devices. The airflow from an air term...
Measurements are performed in a full-scale test room with displacement ventilation with focus on the...
Two-dimensional, isothermal full-scale experiments and CFD (Computational Fluid Dynamics) simulation...
The main objective of ventilation is to provide good air quality for the occupants. For this purpose...
An optimal design of the ventilation system needs a proper prediction of the velocity, temperature a...
Ventilation systems with vertical displacement flow have been used in industrial areas with high the...
The design of a displacement ventilation system involves determination of the flow rate in the therm...
Ceiling-mounted slot diffusers in ventilated rooms will often generate a flow of the wall jet type. ...
The room ventilation is investigated for three different air terminal devices under isothermal condi...
The air supply openings in ventilated rooms are often placed close to the ceiling. A recirculating f...
In ventilated rooms the air inlet device is often placed close to the ceiling. The air inlet will fo...
The paper shows a description of the flow from a low level diffuser which is suitable for a design p...
The airflow in front of an inlet device in a room with displacement ventilation is investigated in t...
The research on air distribution in rooms is often done as full-size investigations, scale-model inv...
The paper describes measuring results of the air movement from three different types of diffusers fo...