Collapse Analysis of Timber Structures

A probabilistic based collapse analysis has been performed for a glulam frame structure supporting the roof over the main court in a Norwegian sports centre. The robustness analysis is based on the framework for robustness analysis introduced in the Danish Code of Practice for the Safety of Structures and a probabilistic modelling of the timber material proposed in the Probabilistic Model Code (PMC) of the Joint Committee on Structural Safety (JCSS). Due to the framework in the Danish Code the timber structure has to be evaluated with respect to the following criteria where at least one shall be fulfilled: a) demonstrating that those parts of the structure essential for the safety only have little sensitivity with respect to unintentional loads and defects, or b) demonstrating a load case with „removal of a limited part of the structure‟ in order to document that an extensive failure of the structure will not occur if a limited part of the structure fails, or c) demonstrating sufficient safety of key elements, such that the entire structure with one or more key elements has the same reliability as a structure where robustness is documented by b). Based on investigations with respect to criteria a) and b) the timber frame structure has one column with a reliability index a bit lower than an assumed target level. By removal three columns one by one no significant extensive failure of the entire structure or significant parts of it are obtained. Therefore the structure can be considered to behave robust according to the sued probabilistic approach. However, the present probabilistic approach for robustness evaluation has to be further developed for a general application to timber systems, and a simplified approach suitable for day-to-day engineering purposes must be identified.A probabilistic based collapse analysis has been performed for a glulam frame structure supporting the roof over the main court in a Norwegian sports centre. The robustness analysis is based on the framework for robustness analysis introduced in the Danish Code of Practice for the Safety of Structures and a probabilistic modelling of the timber material proposed in the Probabilistic Model Code (PMC) of the Joint Committee on Structural Safety (JCSS). Due to the framework in the Danish Code the timber structure has to be evaluated with respect to the following criteria where at least one shall be fulfilled: a) demonstrating that those parts of the structure essential for the safety only have little sensitivity with respect to unintentional loads and defects, or b) demonstrating a load case with „removal of a limited part of the structure‟ in order to document that an extensive failure of the structure will not occur if a limited part of the structure fails, or c) demonstrating sufficient safety of key elements, such that the entire structure with one or more key elements has the same reliability as a structure where robustness is documented by b). Based on investigations with respect to criteria a) and b) the timber frame structure has one column with a reliability index a bit lower than an assumed target level. By removal three columns one by one no significant extensive failure of the entire structure or significant parts of it are obtained. Therefore the structure can be considered to behave robust according to the sued probabilistic approach. However, the present probabilistic approach for robustness evaluation has to be further developed for a general application to timber systems, and a simplified approach suitable for day-to-day engineering purposes must be identified