Add to ORKGThe simulations are performed in a well known two dimensional isothermal annex 20 room benchmark test described by Nielsen (1990)
Two-dimensional, isothermal full-scale experiments and CFD (Computational Fluid Dynamics) simulation...
This paper describes a benchmark test which can be used for tests of CFD predictions of room air dis...
The ventilation design concept, model experiment results, two-dimensional computational fluid dynami...
The purpose of this investigation is to compare the different flow patterns obtained for the 2D isot...
This report shows the results of the simulations given in research item 1.19 (isothermal forced conv...
The turbulent flow pattern is calculated with a low Re number version of the k-∈ model in a room wit...
In the present study, we use Large Eddy Simulations (LES) which is a suitable method for simulating ...
These lecture notes are intended mainly for the 7th semester course "Fluid Dynamics" offered by the ...
The paper describes the development in airflow simulations in rooms . The research is, as other area...
This paper describes the geometry and other boundary conditions for a test case which can be used to...
The use of CFD in ventilation research has arrived to a high level, but there are some conditions in...
The velocity level in a room with jet ventilation is strongly influenced by the supply conditions
The flow in ventilated rooms is often not fully turbulent, but in some regions the flow can be lamin...
It is the purpose of this paper to investigate the ability of a k-E turbulence model to predict air ...
In the summer 1988 13 countries under the International Energy Agency established a cooperative work...
Two-dimensional, isothermal full-scale experiments and CFD (Computational Fluid Dynamics) simulation...
This paper describes a benchmark test which can be used for tests of CFD predictions of room air dis...
The ventilation design concept, model experiment results, two-dimensional computational fluid dynami...
The purpose of this investigation is to compare the different flow patterns obtained for the 2D isot...
This report shows the results of the simulations given in research item 1.19 (isothermal forced conv...
The turbulent flow pattern is calculated with a low Re number version of the k-∈ model in a room wit...
In the present study, we use Large Eddy Simulations (LES) which is a suitable method for simulating ...
These lecture notes are intended mainly for the 7th semester course "Fluid Dynamics" offered by the ...
The paper describes the development in airflow simulations in rooms . The research is, as other area...
This paper describes the geometry and other boundary conditions for a test case which can be used to...
The use of CFD in ventilation research has arrived to a high level, but there are some conditions in...
The velocity level in a room with jet ventilation is strongly influenced by the supply conditions
The flow in ventilated rooms is often not fully turbulent, but in some regions the flow can be lamin...
It is the purpose of this paper to investigate the ability of a k-E turbulence model to predict air ...
In the summer 1988 13 countries under the International Energy Agency established a cooperative work...
Two-dimensional, isothermal full-scale experiments and CFD (Computational Fluid Dynamics) simulation...
This paper describes a benchmark test which can be used for tests of CFD predictions of room air dis...
The ventilation design concept, model experiment results, two-dimensional computational fluid dynami...