The restoration of the Futuro house in Corfu is complicated by being both an art object and a living space. The glass-fiber reinforced polymer (GFRP) materials showed damage that could be related to ageing and exposure to the local, unfavorable environmental conditions (light, humidity and temperature). In order to establish the technical condition of the building, non-destructive techniques were used. Additionally, indoor air quality was tested. The research has shown that the most relevant causes of damage to GFRP materials are moisture, exposure to sunlight and thermal changes. The intervention strategies applied so far are not conclusive. Maintenance is always needed. Further investigations are deemed necessary to understand the propert...
The aim of present research is to monitor the effect of a combination of relevant environmental agen...
The findings of a durability study undertaken on pultruded glass fibre reinforced polymer (GFRP) cla...
In the 1990s, phenolic panels made from Bakelite-finished wood were given a 1 mm-thick finishing lay...
The restoration of the Futuro house in Corfu is complicated by being both an art object and a living...
The Futuro by Matti Suuronen reflects the confidence in the possibilities of plastics as a new build...
The Futuro house was designed in 1968 by the Finnish architect Matti Suuronen. Its prototype, Futuro...
The Futuro by Matti Suuronen reflects the confidence in the possibilities of plastics as a new build...
The four Futuro case studies (Futuro No. 000, Corfu-Futuro, Donaldson-Futuro, Munich-Futuro) present...
From the 1950s to 1970s a handful of architects and designers developed the use of glass-reinforced ...
The four Futuro case studies (Futuro No. 000, Corfu-Futuro, Donaldson-Futuro, Munich-Futuro) present...
The four Futuro case studies (Futuro No. 000, Corfu-Futuro, Donaldson-Futuro, Munich-Futuro) present...
This paper presents an experimental research on the durability of pultruded Glass Fibre Reinforced P...
none2noThe present study deals with the deterioration of materials in the dome of the “Woodpecker” d...
Space Age aesthetic was manifest in the 1960s and embodied in plastic, prefabricated houses. After s...
Contemporary collections frequently contain man-made materials. Although synthetic materials are con...
The aim of present research is to monitor the effect of a combination of relevant environmental agen...
The findings of a durability study undertaken on pultruded glass fibre reinforced polymer (GFRP) cla...
In the 1990s, phenolic panels made from Bakelite-finished wood were given a 1 mm-thick finishing lay...
The restoration of the Futuro house in Corfu is complicated by being both an art object and a living...
The Futuro by Matti Suuronen reflects the confidence in the possibilities of plastics as a new build...
The Futuro house was designed in 1968 by the Finnish architect Matti Suuronen. Its prototype, Futuro...
The Futuro by Matti Suuronen reflects the confidence in the possibilities of plastics as a new build...
The four Futuro case studies (Futuro No. 000, Corfu-Futuro, Donaldson-Futuro, Munich-Futuro) present...
From the 1950s to 1970s a handful of architects and designers developed the use of glass-reinforced ...
The four Futuro case studies (Futuro No. 000, Corfu-Futuro, Donaldson-Futuro, Munich-Futuro) present...
The four Futuro case studies (Futuro No. 000, Corfu-Futuro, Donaldson-Futuro, Munich-Futuro) present...
This paper presents an experimental research on the durability of pultruded Glass Fibre Reinforced P...
none2noThe present study deals with the deterioration of materials in the dome of the “Woodpecker” d...
Space Age aesthetic was manifest in the 1960s and embodied in plastic, prefabricated houses. After s...
Contemporary collections frequently contain man-made materials. Although synthetic materials are con...
The aim of present research is to monitor the effect of a combination of relevant environmental agen...
The findings of a durability study undertaken on pultruded glass fibre reinforced polymer (GFRP) cla...
In the 1990s, phenolic panels made from Bakelite-finished wood were given a 1 mm-thick finishing lay...