Ultrasonic spot welding of open-cell Cu foam and Al plate: A study on the quality of joints

As a type of novel material, open-cell copper (Cu) foam has been widely applied in electrode production of batteries, due to its functional and structural properties. The use of ultrasonic welding technique to join Cu foam and aluminium (Al) plate has been proven to be feasible, but quality evaluation of the joints remains a blank to be filled in. In this study, orthogonal test design is used to investigate the effects of welding pressure, welding amplitude, welding energy and the interaction among the three parameters on the shear-tensile strength of ultrasonically welded joints of Cu foam/Al plate, and it is influenced by the three parameters in the following order: welding pressure > welding energy > welding amplitude. Based on the results of the orthogonal test, a Cu foam/Al plate ultrasonic welding joint evaluation system is established, based on which, qualitative and quantitative analysis on the quality of the joints classified the joints into three grades. The optimal parameter combination of the welding joint of Cu foam/Al plate is obtained as follows: 0.5 MPa, 65 %, 130 J, under which the porous structure of the joint is complete while its tensile strength is equal to or even better than the base material