Influence of bubble growth and liquid film instabilities on droplet impact phenomena under saturated boiling regimes

Evaporation and boiling are processes that occur in many industrial applications involving multiphase flows. For liquid films, however, studies are scarce regarding heat and mass transfer mechanisms and require further research. The main objective of this work is to evaluate bubble formation and detachment, followed by the impact phenomena. Therefore, an experimental setup was built and adapted for this purpose. A borosilicate glass impact surface is placed over a heat source, which consists of an aluminum block with four embedded cartridge heaters that heat the liquid film by conduction. Water and n-heptane are the fluids adopted for the experimental study, as the differences in thermophysical properties allow for a wider range of experiments. Study cases include dimensionless temperatures of θ > 0.6 for similar impact conditions. In terms of bubble formation, n-heptane displays smaller bubble diameters and higher release rates, whereas water exhibits larger bubbles and lower rates. Qualitatively, liquid film temperatures close to the saturation temperature do not reveal a direct influence on the crown development and posterior secondary atomization. For later stages of the impact, the central jet height and breakup are influenced by the film temperature, which is associated with the variation of thermophysical properties.Fundação para a Ciência e a Tecnologia