Long-term load-deformation behavior and strength of elastomer-based adhesives /

Dimensional stability and durability of COM-PLY studs exposed to soaking, high humidity, and weathering /

Duff, John E.
United States. Forest Service.
United States. Division of Energy, Building Technology, and Standards.
Southeastern Forest Experiment Station (Asheville, N.C.)

Issued July 1980.Prepared in cooperation with U.S. Dept. of Housing and Urban Development, Division ...

Residual stress and the yield strength of steel beams,

Yang, Ching Huan.
Welding Research Council (U.S.)

January 1951

Sponsored jointly by the Welding Research Council and the Department of the Navy.Mode of access: Int...

Determination of mechanical properties of adhesives for use in the design of bonded joints /

Kuenzi, Edward W.

"This report is one of a series issued in cooperation with the MIL-HDBK-23 Working Group on Composit...

Adhesives for COM-PLY studs /

Vick, Charles B.
United States. Forest Service
United States. Division of Energy, Building Technology, and Standards.
Southeastern Forest Experiment Station (Asheville, N.C.)

Issued Aug. 1977.Prepared in cooperation with U.S. Dept. of Housing and Urban Development, Division ...

Thermal stability evaluation of elastomeric seal materials /

Moore, R. E.
Bettis Atomic Power Laboratory
Westinghouse Electric Corporation.
U.S. Atomic Energy Commission.

"Contract AT-11-1-GEN-14.""July 1964."Includes bibliographical references (page 17).Mode of access: ...

Strength and stiffness of composite studs /

Wittenberg, Dick C.
United States. Forest Service
United States. Division of Energy, Building Technology, and Standards.
Southeastern Forest Experiment Station (Asheville, N.C.)

Issued July 1977.Prepared in cooperation with U.S. Dept. of Housing and Urban Development, Division ...

Durability and dimensional stability of COM-PLY studs /

Duff, John E.
United States. Division of Energy, Building Technology, and Standards.
United States. Forest Service
Southeastern Forest Experiment Station (Asheville, N.C.)

Issued Aug. 1977.Prepared in cooperation with U.S. Dept. of Housing and Urban Development, Division ...

Structural performance of nailed joints with COM-PLY studs /

Walker, Roy M.
United States. Division of Energy, Building Technology, and Standards.
United States. Forest Service.
Southeastern Forest Experiment Station (Asheville, N.C.)

January 1977

Issued Sept. 1977.Prepared in cooperation with U.S. Dept. of Housing and Urban Development, Division...

The effect of configuration on strength, durability, and handle of Kevlar fabric-based materials /

Rueter, L. L.
Munson, J. B., joint author.
Sheldahl, Inc.
Langley Research Center.
United States. National Aeronautics and Space Administration.

January 1977

Issued July 1977.Contract NAS 1-12701.Includes bibliographical references.Mode of access: Internet

Structural properties of COM-PLY studs /

McAlister, Robert H.
United States. Division of Energy, Building Technology, and Standards.
United States. Forest Service
Southeastern Forest Experiment Station (Asheville, N.C.)

Issued May 1978.Prepared in cooperation with U.S. Dept. of Housing and Urban Development, Division o...

The stiffness properties of stressed fabrics as obtained from model tests /

Zender, George W.
Deaton, Jerry W.
United States. National Aeronautics and Space Administration.

Cover title."August 1961."Stresses and loads; Structures.Includes bibliographical references.Mode of...

Development of conductive adhesives flexible at low temperatures /

Hartzel, L.W.
Sakornbut, S.S.
Monsanto Research Corporation.
Mound Laboratory.
U.S. Atomic Energy Commission.

January 1964

"Issued: August 10, 1964""Date: March 9, 1964"U.S. Atomic Energy Commission Contract ;Mode of access...

Relationship of polymer structure to thermal deterioration of adhesive bonds in metal joints /

Black, John M.
Blomquist, Richard Frederick, 1912-
Forest Products Laboratory (U.S.)

Prepared at Forest Products Laboratory, Madison, Wis."August 1959."Cover title.Includes bibliographi...

Determination of the creep deflection and lifetime of aluminum-alloy multiweb box beams subjected to varied loads at constant temperature /

Berkovits, Avraham.
United States. National Aeronautics and Space Administration.

Cover title."June 1962."Stresses and loads.Includes bibliographical references.Mode of access: Inter...

Elastic-plastic torsion problem for strain-hardening materials /

Mendelson, Alexander.
Lewis Research Center.
United States. National Aeronautics and Space Administration.

January 1968

Cover title."February 1968."Includes bibliographical references (p. 22).Mode of access: Internet

Dimensional stability and durability of COM-PLY studs exposed to soaking, high humidity, and weathering /

Duff, John E.
United States. Forest Service.
United States. Division of Energy, Building Technology, and Standards.
Southeastern Forest Experiment Station (Asheville, N.C.)

Issued July 1980.Prepared in cooperation with U.S. Dept. of Housing and Urban Development, Division ...

Residual stress and the yield strength of steel beams,

Yang, Ching Huan.
Welding Research Council (U.S.)

January 1951

Sponsored jointly by the Welding Research Council and the Department of the Navy.Mode of access: Int...

Determination of mechanical properties of adhesives for use in the design of bonded joints /

Kuenzi, Edward W.

"This report is one of a series issued in cooperation with the MIL-HDBK-23 Working Group on Composit...

Adhesives for COM-PLY studs /

Vick, Charles B.
United States. Forest Service
United States. Division of Energy, Building Technology, and Standards.
Southeastern Forest Experiment Station (Asheville, N.C.)

Issued Aug. 1977.Prepared in cooperation with U.S. Dept. of Housing and Urban Development, Division ...

Thermal stability evaluation of elastomeric seal materials /

Moore, R. E.
Bettis Atomic Power Laboratory
Westinghouse Electric Corporation.
U.S. Atomic Energy Commission.

"Contract AT-11-1-GEN-14.""July 1964."Includes bibliographical references (page 17).Mode of access: ...

Strength and stiffness of composite studs /

Wittenberg, Dick C.
United States. Forest Service
United States. Division of Energy, Building Technology, and Standards.
Southeastern Forest Experiment Station (Asheville, N.C.)

Issued July 1977.Prepared in cooperation with U.S. Dept. of Housing and Urban Development, Division ...

Durability and dimensional stability of COM-PLY studs /

Duff, John E.
United States. Division of Energy, Building Technology, and Standards.
United States. Forest Service
Southeastern Forest Experiment Station (Asheville, N.C.)

Issued Aug. 1977.Prepared in cooperation with U.S. Dept. of Housing and Urban Development, Division ...

Structural performance of nailed joints with COM-PLY studs /

Walker, Roy M.
United States. Division of Energy, Building Technology, and Standards.
United States. Forest Service.
Southeastern Forest Experiment Station (Asheville, N.C.)

January 1977

Issued Sept. 1977.Prepared in cooperation with U.S. Dept. of Housing and Urban Development, Division...

The effect of configuration on strength, durability, and handle of Kevlar fabric-based materials /

Rueter, L. L.
Munson, J. B., joint author.
Sheldahl, Inc.
Langley Research Center.
United States. National Aeronautics and Space Administration.

January 1977

Issued July 1977.Contract NAS 1-12701.Includes bibliographical references.Mode of access: Internet

Structural properties of COM-PLY studs /

McAlister, Robert H.
United States. Division of Energy, Building Technology, and Standards.
United States. Forest Service
Southeastern Forest Experiment Station (Asheville, N.C.)

Issued May 1978.Prepared in cooperation with U.S. Dept. of Housing and Urban Development, Division o...

The stiffness properties of stressed fabrics as obtained from model tests /

Zender, George W.
Deaton, Jerry W.
United States. National Aeronautics and Space Administration.

Cover title."August 1961."Stresses and loads; Structures.Includes bibliographical references.Mode of...

Development of conductive adhesives flexible at low temperatures /

Hartzel, L.W.
Sakornbut, S.S.
Monsanto Research Corporation.
Mound Laboratory.
U.S. Atomic Energy Commission.

January 1964

"Issued: August 10, 1964""Date: March 9, 1964"U.S. Atomic Energy Commission Contract ;Mode of access...

Relationship of polymer structure to thermal deterioration of adhesive bonds in metal joints /

Black, John M.
Blomquist, Richard Frederick, 1912-
Forest Products Laboratory (U.S.)

Prepared at Forest Products Laboratory, Madison, Wis."August 1959."Cover title.Includes bibliographi...

Determination of the creep deflection and lifetime of aluminum-alloy multiweb box beams subjected to varied loads at constant temperature /

Berkovits, Avraham.
United States. National Aeronautics and Space Administration.

Cover title."June 1962."Stresses and loads.Includes bibliographical references.Mode of access: Inter...

Elastic-plastic torsion problem for strain-hardening materials /

Mendelson, Alexander.
Lewis Research Center.
United States. National Aeronautics and Space Administration.

January 1968

Cover title."February 1968."Includes bibliographical references (p. 22).Mode of access: Internet

Dimensional stability and durability of COM-PLY studs exposed to soaking, high humidity, and weathering /

Duff, John E.
United States. Forest Service.
United States. Division of Energy, Building Technology, and Standards.
Southeastern Forest Experiment Station (Asheville, N.C.)

Issued July 1980.Prepared in cooperation with U.S. Dept. of Housing and Urban Development, Division ...

Residual stress and the yield strength of steel beams,

Yang, Ching Huan.
Welding Research Council (U.S.)

January 1951

Sponsored jointly by the Welding Research Council and the Department of the Navy.Mode of access: Int...

Determination of mechanical properties of adhesives for use in the design of bonded joints /

Kuenzi, Edward W.

"This report is one of a series issued in cooperation with the MIL-HDBK-23 Working Group on Composit...

Long-term load-deformation behavior and strength of elastomer-based adhesives /

Abstract

Extracted data

Long-term load-deformation behavior and strength of elastomer-based adhesives /

Abstract

Extracted data

Related items

Related items