Add to ORKGAtomic force microscopy force-curve experiments are conducted on methoxy-terminated tri(ethylene glycol) system, adsorbed as SAMs on evaporated gold and silver. These measurements are made using a silicon nitride tip that has been gold coated and functionalized by hexadecane thiol. The medium chosen of the force-curve measurements is the same as that used for the fibrinogen adsorption studies, namely phosphate-buffered saline. Initial results show a strong correlation between protein resistance and repulsive interaction between the (hydrophobic) tip and the surface.</p
An atomic force microscope (AFM) operating in the lateral (frictional) force mode (LFM) was used to ...
In this thesis, a direct method of Atomic Force Microscopy (AFM) technique has been developed to mea...
This paper describes friction experiments and pull-off force measurements using atomic force microsc...
Functionalized scanning force microscope (SFM) probes were used to investigate and to mimic the inte...
Functionalized scanning force microscope (SFM) probes were used to investigate and to mimic the inte...
<div><p>The effects of functional groups and structures at the surface of biomaterials on protein ad...
Interaction forces between surfaces designed to be protein resistant and fibrinogen (Fg) were invest...
The main hypothesis of this work is that silicon dioxide nanofluids can reduce the work of adhesion ...
The atomic force microscope (AFM) is a very promising and powerful tool for investigating a range of...
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 20...
Adhesion forces between functionalized gold colloidal nanoparticles (Au NPs) and scanning probe micr...
The atomic force microscope (AFM) has been used to measure surface forces between silicon nitride AF...
A novel, direct technique has been developed to measure the interactions of bovine serum albumin (BS...
The nanochemical characterization of organic/polymer surfaces is an increasing technological need th...
Chemical force microscopy (CFM) was used to measure the adhesion force between NH2-terminated probe ...
An atomic force microscope (AFM) operating in the lateral (frictional) force mode (LFM) was used to ...
In this thesis, a direct method of Atomic Force Microscopy (AFM) technique has been developed to mea...
This paper describes friction experiments and pull-off force measurements using atomic force microsc...
Functionalized scanning force microscope (SFM) probes were used to investigate and to mimic the inte...
Functionalized scanning force microscope (SFM) probes were used to investigate and to mimic the inte...
<div><p>The effects of functional groups and structures at the surface of biomaterials on protein ad...
Interaction forces between surfaces designed to be protein resistant and fibrinogen (Fg) were invest...
The main hypothesis of this work is that silicon dioxide nanofluids can reduce the work of adhesion ...
The atomic force microscope (AFM) is a very promising and powerful tool for investigating a range of...
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 20...
Adhesion forces between functionalized gold colloidal nanoparticles (Au NPs) and scanning probe micr...
The atomic force microscope (AFM) has been used to measure surface forces between silicon nitride AF...
A novel, direct technique has been developed to measure the interactions of bovine serum albumin (BS...
The nanochemical characterization of organic/polymer surfaces is an increasing technological need th...
Chemical force microscopy (CFM) was used to measure the adhesion force between NH2-terminated probe ...
An atomic force microscope (AFM) operating in the lateral (frictional) force mode (LFM) was used to ...
In this thesis, a direct method of Atomic Force Microscopy (AFM) technique has been developed to mea...
This paper describes friction experiments and pull-off force measurements using atomic force microsc...