Activated biocarbons obtained from lignocellulosic precursors as potential adsorbents of ammonia

The investigated materials were new biocarbons: FC (Fir Cone), FS (Fir Sawdust), FB (Fir Bark), BS (Birch Sawdust), BB (Birch Bark), AS (Acacia Sawdust), AB (Acacia Bark), OS (Oak Sawdust), OB (Oak Bark), HS (Hornbeam Sawdust)) obtained via pyrolysis and CO2 activation of wood waste (lignocellulosic biomass). In order to study the influence of the carbon precursor on the physicochemical properties of biocarbons there were used the precursors: cones, sawdust, and bark of various tree species. The obtained adsorbents were characterized based on the results, of the N2 adsorption, scanning electron microscopy (SEM), elemental analysis (CHNS), thermogravimetry (TG), derivative thermogravimetry (DTG), and differential thermal analysis (DTA), Fourier Transform Infrared Spectroscopy FT-IR (ATR) and the Boehm’s titration method as well as pHpzc (the point of zero charge). The adsorption capacity and the temperature-programmed desorption (TPD) of ammonia were also studied. The obtained activated biocarbons were characterized by the large specific surface area (515 to 1286 m2/g) and the total pore volume (0.27 to 0.46 cm3/g) as well as the well-developed microporous structure (76 - 90%). The maximum NH3 adsorption capacity of the activated biocarbon was determined to be 2.93 mmol/g (FC (Fir Cone)). These results prove that the lignocellulosic precursors are appropriate for preparation of environmentally friendly and cost-effective biocarbons