Simple and additive-free synthesis of highly reflective thin silver films and their application on large-scale surfaces

There is a growing demand for highly reflective coatings especially on non-conducting surfaces for use in various industries. Additionally, focus is arising on green production and cost reduction in terms of energy, time, etc., which require detailed investigation of coating process parameters. Therefore, in this work, silver thin films with high reflectance were synthesized on glass substrates in short durations at room temperature by electroless plating (ELP) method in one-step and without using any additives. Effects of deposition time, concentration of the reactants (AgNO3, Glucose, NaOH), and also the surface pretreatment and activation steps were investigated in detail to improve the reflectance and structural properties of silver films. Contact angle measurements were realized to examine the effects of each surface modification step. Surfaces subjected to etching, sensitization and Ag activation were found to yield more homogeneously distributed nanoparticles in short deposition period. Scanning electron microscopy (SEM) also showed smaller-sized spherulite-shaped crystals, forming a close packed structure with an optimum film thickness of ∼110 nm. The continuity of the silver coatings on the surface was verified by the low sheet resistance of 0.18 Ωsq−1. Atomic force microscopy (AFM) analysis revealed a smoother film structure with an RMS of 10.7 nm after sensitization. X-ray diffraction analysis (XRD) and X-ray photoelectron spectroscopy analysis (XPS) analysis proved the growth of highly crystalline silver nanoparticles with high purity. All these morphological improvements led to high values of light (∼97%), near-infrared (99%) and solar (96%) reflectance for the coatings. Finally, based on the optimized concentrations and bath conditions, large-scale (700×500 mm2) first-surface mirrors were successfully produced (96.2%R and 0.25 Ωsq−1) by spray coating technique combined with ELP. Overall, the results indicate that the obtained films have potential usage in applications such as solar energy, electronics and aeronautics. © 2023 Elsevier LtdTürkiye Bilimsel ve Teknolojik Araştırma Kurumu, TÜBİTAK: 113M93