Schematic diagram of well structure.

The high pressure in some gas wells, such as those in the Xushen gas field in Daqing, China, makes them susceptible to freezing and hydrate blockages. Downhole throttling technology is widely used to reduce costs during well construction, however, due to the limitations of temperature, pressure and depth structure, this technology is sometime applied independently in some gas wells in which freezing and blockages are a frequent problem that can seriously affect production capacity. Moreover, artificial alcohol injection of ‘passive plugging’ to prevent hydrate formation not only consumes significant amounts of methanol but its efficiency is also dependent on factors such as weather, personnel and equipment, so it is not a continuous solution. In order to solve the above problems, the mechanism of hydrate formation was analyzed in this study, from which a combined mechanical and chemical hydrate control process was developed. OLGA software was used to design the process parameters of the novel mechanical and chemical inhibition technology for hydrate prevention and control, and also to simulate and analyze the wellhead temperature, pressure and hydrate generation once the process was implemented. Based on the results of the parameters calculation, the downhole throttle and hydrate inhibitor automatic filling device are used to realize the functions of downhole throttle depressurization and hydrate inhibitor continuous filling, reduce the wellhead pressure and hydrate generation temperature, and ensure the continuous production of gas well. This novel combination process was subsequently tested in three wells in the Daqing gas oilfield. Measurements showed that the average daily gas increase from a single well was 0.5×104m3, methanol consumption was reduced from the original maximum daily amount of 1750 kg to just 60 kg, the manual maintenance workload was reduced by 80%, and the rate of the well openings was increased from 45% to 100%. These results proved that this technology is feasible and efficient for applications in gas wells with high downhole pressure and low wellhead temperature, and, thus, provides important technical support for the prevention of gas hydrate and improvement of gas well production.