Cylinder Pressure Feedback Control for Ideal Thermodynamic Cycle Tracking:Towards Self-learning Engines

To meet increasingly strict future greenhouse gas and pollutant emission targets, development time and costs of heavy-duty internal combustion engines will reach unacceptable levels. This is mainly due to increased system complexity and need to guarantee robust performance under a wide range of real-world conditions. Cylinder Pressure Based Control is a major contributor to achieve these goals in advanced, highly-efficient engine concepts. Current Cylinder Pressure Based Control approaches use combustion and air-path parameters as feedback signals. These signals are not directly linked to engine efficiency; therefore, compensation for changing ambient conditions, engine ageing or differences in fuel qualities is a non-trivial problem. Contrary to other methods, the method presented in this paper aims to realise an idealised thermodynamic cycle by directly control of the entire cylinder pressure curve. From measured in-cylinder pressure, a new set of feedback signals is derived using principlecomponent decomposition. With these signals, optimal fuel path settings are determined. The potential of this method is demonstrated for a dual fuel Reactivity Controlled Compression Ignition (RCCI) engine, which combines very high efficiency and ultra low nitrogen oxides and particle matter emission. For the studied RCCI engine, it is shown that the newly proposed optimisation method gave the same optimal fuel path settings as existing methods. This is animportant step towards self-learning engines.To meet increasingly strict future greenhouse gas and pollutant emission targets, development time and costs of heavy-duty internal combustion engines will reach unacceptable levels. This is mainly due to increased system complexity and need to guarantee robust performance under a wide range of real-world conditions. Cylinder Pressure Based Control is a major contributor to achieve these goals in advanced, highly-efficient engine concepts. Current Cylinder Pressure Based Control approaches use combustion and air-path parameters as feedback signals. These signals are not directly linked to engine efficiency; therefore, compensation for changing ambient conditions, engine ageing or differences in fuel qualities is a non-trivial problem. Contrary to other methods, the method presented in this paper aims to realise an idealised thermodynamic cycle by directly control of the entire cylinder pressure curve. From measured in-cylinder pressure, a new set of feedback signals is derived using principle component decomposition. With these signals, optimal fuel path settings are determined. The potential of this method is demonstrated for a dual fuel Reactivity Controlled Compression Ignition (RCCI) engine, which combines very high efficiency and ultra low nitrogen oxides and particle matter emission. For the studied RCCI engine, it is shown that the newly proposed optimisation method gave the same optimal fuel path settings as existing methods. This is an important step towards self-learning engines