Add to ORKGThe aim of this paper is electromagnetic testing of innovative shielding textiles in the frequency range from 30 MHz up to 1300 MHz. These new materials were obtained using plasma metallization process. The metallic film was deposited by magnetron sputtering in argon atmosphere from Zn-target on the polypropylene (PP) nonwovens. The microstructure of Zn-films was studied by scanning microscopy (SEM). Obtained metallic layers were characterized by good adhesion to PP and shielding effectiveness (SE) over 50 dB. It was indicated that 3
The aim of work was to develop flexible shielding materials with radio protective properties. The ar...
The aim of this study is to investigate the nanocoated textile fabric samples with Al and Zn metal m...
Nickel-phosphorus/copper-nickel (Ni-P/Cu-Ni) multilayers are electroless deposited onto polyester fa...
In this study, a method of the metallisation of polypropylene (PP) nonwovens is presented.The influe...
Composite materials for electromagnetic shielding can be manufactured as textiles using conductive y...
Engineering of materials used for shielding from electromagnetic fields is currently one of the most...
The paper discusses the results of research concerning the formation of electroconductive transmissi...
Thesis (Master)--Izmir Institute of Technology, Physics, Izmir, 2011Includes bibliographical referen...
Within the current work an attempt was made to use glow discharge low temperature plasma processing ...
This paper presents the principles of formation and properties of new fibre composite materials for ...
The paper presents the results and analysis of interdisciplinary research concerning electromagnetic...
Composite materials are becoming more widely used in the technique of shielding electromagnetic fiel...
The aim of work was to develop flexible shielding materials with radio protective properties. The ar...
The deposition of functional films on a flexible substrate as textiles by sputter coating has attrac...
Composites were shown to be the most promising materials for protection against electromagnetic fiel...
The aim of work was to develop flexible shielding materials with radio protective properties. The ar...
The aim of this study is to investigate the nanocoated textile fabric samples with Al and Zn metal m...
Nickel-phosphorus/copper-nickel (Ni-P/Cu-Ni) multilayers are electroless deposited onto polyester fa...
In this study, a method of the metallisation of polypropylene (PP) nonwovens is presented.The influe...
Composite materials for electromagnetic shielding can be manufactured as textiles using conductive y...
Engineering of materials used for shielding from electromagnetic fields is currently one of the most...
The paper discusses the results of research concerning the formation of electroconductive transmissi...
Thesis (Master)--Izmir Institute of Technology, Physics, Izmir, 2011Includes bibliographical referen...
Within the current work an attempt was made to use glow discharge low temperature plasma processing ...
This paper presents the principles of formation and properties of new fibre composite materials for ...
The paper presents the results and analysis of interdisciplinary research concerning electromagnetic...
Composite materials are becoming more widely used in the technique of shielding electromagnetic fiel...
The aim of work was to develop flexible shielding materials with radio protective properties. The ar...
The deposition of functional films on a flexible substrate as textiles by sputter coating has attrac...
Composites were shown to be the most promising materials for protection against electromagnetic fiel...
The aim of work was to develop flexible shielding materials with radio protective properties. The ar...
The aim of this study is to investigate the nanocoated textile fabric samples with Al and Zn metal m...
Nickel-phosphorus/copper-nickel (Ni-P/Cu-Ni) multilayers are electroless deposited onto polyester fa...