The critical current density was measured at low temperatures for Bi-2212 single crystals with small anisotropy prepared by oxygen doping and by addition of Pb. The anisotropy parameters of these specimens were about 66. The Pb-doped specimen showed the peak effect up to T/Tc = 0.7. The critical current density at high fields of these specimens was significantly improved as well as the irreversibility field than specimens with larger anisotropy
Superconducting Bi-2212/Ag monocore wires of 0.65, 1.0, 1.2 and 1.5 mm diameter have been fabricated...
In order to substitute cheaper sheath materials for Ag, Bi-2212 superconducting thick films grown on...
We present measurements of the angular dependence of the critical field connected to the onset of th...
The critical current density in Bi-2212 superconductors with various anisotropies irradiated by heav...
The critical current density (J_c) of Bi(2212) tapes were measured at 77K and 4.2K in magnetic field...
The temperature dependence of the critical current density has been studied in magnetic fields up to...
The critical current density and the irreversibility field were measured before and after nickel ion...
Critical-current density (Jc) is a parameter of primary importance for potential applica-tions of hi...
The design of HTS magnets is often based on the properties of a number of short samples that are pre...
Pinning properties such as the critical current density and the irreversibility field of superconduc...
The magnetic properties of ceramic samples of Bi(PbSn)SrCaCu O (x = 0,0.1,0.2,0.3 and 0.4) supercond...
Studies of superconductivity and flux pinning were carried out on (Bi1.64Pb0.36)Sr2Ca1–xYxCu2O8 + y ...
Bismuth cuprate high temperature superconductors are currently the only ceramic material that can be...
The condensation energy which determines the pinning strength is estimated from the pinning property...
The critical current property of Bi-2223 silver sheathed tape has been significantly improved by app...
Superconducting Bi-2212/Ag monocore wires of 0.65, 1.0, 1.2 and 1.5 mm diameter have been fabricated...
In order to substitute cheaper sheath materials for Ag, Bi-2212 superconducting thick films grown on...
We present measurements of the angular dependence of the critical field connected to the onset of th...
The critical current density in Bi-2212 superconductors with various anisotropies irradiated by heav...
The critical current density (J_c) of Bi(2212) tapes were measured at 77K and 4.2K in magnetic field...
The temperature dependence of the critical current density has been studied in magnetic fields up to...
The critical current density and the irreversibility field were measured before and after nickel ion...
Critical-current density (Jc) is a parameter of primary importance for potential applica-tions of hi...
The design of HTS magnets is often based on the properties of a number of short samples that are pre...
Pinning properties such as the critical current density and the irreversibility field of superconduc...
The magnetic properties of ceramic samples of Bi(PbSn)SrCaCu O (x = 0,0.1,0.2,0.3 and 0.4) supercond...
Studies of superconductivity and flux pinning were carried out on (Bi1.64Pb0.36)Sr2Ca1–xYxCu2O8 + y ...
Bismuth cuprate high temperature superconductors are currently the only ceramic material that can be...
The condensation energy which determines the pinning strength is estimated from the pinning property...
The critical current property of Bi-2223 silver sheathed tape has been significantly improved by app...
Superconducting Bi-2212/Ag monocore wires of 0.65, 1.0, 1.2 and 1.5 mm diameter have been fabricated...
In order to substitute cheaper sheath materials for Ag, Bi-2212 superconducting thick films grown on...
We present measurements of the angular dependence of the critical field connected to the onset of th...