Investigating the Effect of Modifying Aggregate Surface by Micronized Calcium Carbonate on Increasing the Moisture Resistance of Asphalt Mixtures

The adhesion between aggregate and asphalt binder in dry conditions, and the amount of its reduction in wet conditions are amongst fundamental indicators that moisture sensitivity amount of asphalt mixtures is dependent to. Among different methods to increase adhesion, modification of aggregates surface with anti-stripping materials is known as an effective method. Therefore, the effect of covering aggregates surface with micronized calcium carbonate as a proper and inexpensive anti-stripping material was investigated. Accordingly, in order to evaluate mixes, first, mechanical methods were used, and then thermodynamic methods were employed to determine the mechanism of the effect of calcium carbonate on increasing asphalt mix resistance to moisture damage. In order to conduct this research, three types of aggregates including limestone, granite, and quartzite, for their different degrees of hydrophilic, and two types of asphalt binder 60–70 and 85–100 were used to produce mixtures. Results obtained by mechanical methods show that modification of aggregates surface causes an increase in the tensile strength ratio (TSR) in the samples made by both two types of asphalt binder. In addition, results of surface free energy method indicate the increase of adhesion energy (except in granite samples) and reduction of debonding energy in all modified samples. Generally, evaluations conducted by the use of both methods show that covering aggregates by micronized calcium carbonate has a positive effect on reducing moisture sensitivity of asphalt mixes