Optimization and fabrication of MEMS based piezoelectric acoustic sensor for wide frequency range and high SPL acoustic application

This paper reports finite element model (FEM) simulation and fabrication of a square shaped diaphragm along with microtunnel for MEMS acoustic sensor which can be used for measurement of wide operational frequency range and high sound pressure level (SPL) 100 dB–180 dB measurement in launching vehicle and aircraft. The structure consists of a piezoelectric ZnO layer sandwiched between two aluminum electrodes on a thin silicon diaphragm. There is a microtunnel in the structure which relates the cavity to the atmosphere for pressure compensation. The microtunnel decides the lower cut-off frequency of device. Analytical and simulation approaches are used to optimize microtunnel dimension and simulation approach for diaphragm structure optimization. The change in displacement, stress, sensitivity and resonance frequency due to different diaphragm sizes with diaphragm thickness variation is also analyzed. The optimized diaphragm structure of 1750 × 1750 μm2 and microtunnel of 100 μm wide and 24 μm deep have been fabricated using bulk micromachining technique. The fabricated device response has been tested using LDV and sensitivity measurement system